Hi all,
I am very busy right now so I decided to skip one wire stepper control for the actual project since its just a fancy add on and I want to get get this finished as soon as possible.
All my projects were based on Stripboard layouts and i got problem with bridges between two contacts so I etched my first pcb today (after 3 years of hobby electronics this moment had to come sooner or later). Its a one wire relais board with 3 relais (220V / 16A) controlled by a DS2408 and 3 connectors for sensors. The Relais In Outs will be heavily covered with solder to be on the safe side.
I will drill and solder it tomorrow, I hope it will work (press both thumbs for me guys), so far I am very pleased with the etching results, the smd pads for the ds2408 look fine and I am very happy that I wont have to bother with flying wires between smd chip feet anymore.
Electrical Skill +1 XP
I will keep you udpdate when everything works (or not), Paul I will sent you some Pics when the project is finished
Simon
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
