Ok with new unit and after I reinstalled both fuse (tested) and owfs (newest cvs) I get the following

[EMAIL PROTECTED] /]# /opt/owfs/bin/owfs --error_level=9 -u /mnt/1wire/
INFO: PARSENAME path=

ERR: Opened USB DS9490 adapter at 002/002.
: No data available
INFO: DS9490_setup_adapter: done

INFO: DS9490_overdrive()

INFO: DS9490_reset: ok

INFO: Found device [125494360000009A] on adapter [002/002]

INFO: DS9490_reset: ok

INFO: Found a DS1420 device [817FCD24000000A6]

INFO: Found device [817FCD24000000A6] on adapter [002/002]

INFO: Set DS9490 [817FCD24000000A6] unique id to adapter [002/002]
[EMAIL PROTECTED] /]# ls /mnt/1wire/
12.549436000000  81.7FCD24000000  alarm  bus.0  settings  statistics  structure  system  uncached
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: reading directory /mnt/1wire/: Software caused connection abort
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: /mnt/1wire/: Transport endpoint is not connected

When I try it with a different device (thermometer) attached I get similar results.
___
[EMAIL PROTECTED] /]# umount /mnt/1wire
[EMAIL PROTECTED] /]# /opt/owfs/bin/owfs --error_level=9 -u /mnt/1wire/
INFO: PARSENAME path=

ERR: Opened USB DS9490 adapter at 002/002.
: No data available
INFO: DS9490_setup_adapter: done

INFO: DS9490_overdrive()

INFO: DS9490_reset: ok

INFO: Found device [100B3540000000B5] on adapter [002/002]

INFO: DS9490_reset: ok

INFO: Found a DS1420 device [817FCD24000000A6]

INFO: Found device [817FCD24000000A6] on adapter [002/002]

INFO: Set DS9490 [817FCD24000000A6] unique id to adapter [002/002]
[EMAIL PROTECTED] /]# ls /mnt/1wire/
10.0B3540000000  81.7FCD24000000  alarm  bus.0  settings  simultaneous  statistics  structure  system  uncached
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: reading directory /mnt/1wire/: Software caused connection abort
[EMAIL PROTECTED] /]# ls /mnt/1wire/
ls: /mnt/1wire/: Transport endpoint is not connected
________________________________________________

On 8/31/05, Phil Strong <[EMAIL PROTECTED]> wrote:
Awesome I will try it when I get home Paul thanks so far for all your help.


On 8/30/05, Alfille, Paul H.,M.D. < [EMAIL PROTECTED]> wrote:
Hmm... I think both would work well, as well as the DS9490 (USB) and the LINK
adapters.

Before you do that, try something I'm uploading now: OWFS-DSL

I mentioned it in another post, but now the unified CD image is available.

It is a bootable live-CD distribution with owfs already configured.

Download mydsl.iso and burn it to a CD, then boot off it. If everything works,
the problem isn't hardware.

Paul


-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Phil Strong
Sent: Tue 8/30/2005 2:26 PM
To: [email protected]
Subject: [Owfs-developers] Which part to buy

I have been having trouble with owfs and my machine and want to rule out the
idea that the serial to 1wire device I have now isn't faulty. Currently I
have a DS9097U-S09 should I buy another one of those or something different.

   - DS9097U-S09
      - 9-Pin RS-232-C port
      - Communicates with all *i*Buttons, can read but not write to
      DS198x EPROM *i*Buttons
   - DS9097U-009
      - 9-Pin RS-232-C port
      - Has internal 64-bit address
      - Communicates with all *i*Buttons, can read but not write to
      DS198x EPROM *i*Buttons

get the DS9097U-009? Basically the most trustworthy device possible with
owfs!

--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]





--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]



--
Phil Strong
Synergetic Data Systems
(w) 240 793 6565
[EMAIL PROTECTED]

Reply via email to