> > For example from the combination: > > DS18S20 + DS2405 + DS18S20 + TAI-8570 (AAG Pressure Sensor) > > I can read only: DS18S20 + DS2406 (Pressure Sensor) > > > welcome to the bug-ground... try reading the adresses with digitemp -a > - -w -s <serial> ... you should be able to acess the directory using owfs > although it isn't there (displayed) > > > from the combination: DS18S20 + DS2405 + DS18S20 > > I can read only DS18S20 etc. > > > try to access it blindly... it works here
I noticed that I have removed one 5ms delay when resetting the 1-wire bus. This delay should only be needed when DS1994/DS2404 devices are found on the bus, but I have added it again for all adapters as default. It will be a bit slower, but perhaps it's working again. The delay could be turned off again by: echo "0" > system/adapter/ds2404_compliance.0 Perhaps this delay is needed for your adapter for some reason? Otherwise I can't see any big difference to digitemp's code. Check out the latest CVS-version and try that again. /Christian ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
