I think they are from the "Battery Group". I'd wait until we have support under Linux. We can also run some comparative tests. I'm not sure they have any hardware acceleration of the search algorythm.
Paul -----Original Message----- From: [EMAIL PROTECTED] on behalf of Gregg Levine Sent: Tue 9/20/2005 9:55 PM To: [email protected] Subject: Re: [Owfs-developers] Installing owfs Hello from Gregg C Levine Paul how difficult are these newer adapters to obtain? They look a lot more interesting then the normal USB based adapter I am using now. -- Gregg C Levine [EMAIL PROTECTED] "This signature was once found posting rude messages in English in the Moscow subway." On 9/20/05, Alfille, Paul H.,M.D. <[EMAIL PROTECTED]> wrote: > Clearly not me. But you are right. A new release is needed. That's one of the > advantages of the bootable disk. > > I'm now working on support for a new adapter: DS9123O, USB based PIC adapter > from Dallas with 1-wire, 2-wire, 3-wire and SPI support. > > Apparently open design, though that's not entirely clear. Some information in > http://owfs.sf.net/adapters.html > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf of Christian > Magnusson > Sent: Tue 9/20/2005 2:47 PM > To: owfs-developers > Subject: Re: [Owfs-developers] Installing owfs > > > Ahh.. Now I understand... It's the problem I had before... On some > mirrors owfs-2.1p0RC.tar.gz is incomplete or missing lots of files! > That's when I added the --disable-swig parameter to ./configure > to figure out what was wrong. > > We really have to build a new version... and then build a default > configure script too (I guess it shouldn't be built on the very latest > installed distribution such as Fedore Core 4). In that case the > generated files won't be useful on older systems like Fedora Core 1 > etc... > > I think we should remove ./configure from bootstrap when we include > the automake files into the tar-files. > > I'm not sure how it should be packed to follow all standards, but > this method seem to work pretty good I think. > > cvs co owfs > cd owfs > ./bootstrap > ./configure > make > make clean > rm -rf autom4te.cache/ > find . -name CVS -type d | xargs rm -rf > cd .. > tar -czf owfs-new.tar.gz owfs > > > Are there any expert on packaging new releases? :) > > /Christian > > > > On Tue, 2005-09-20 at 15:33, Nils Nilsson wrote: > > .configure --disable-owperl --disable-owpython > > > > gives the same error.... > > > > the folder /module/swig/perl5 > > is empty... > > > > have tryed to disable a lot of stuff to get rid of the swig usage but with > > no success. > > even read a archived mail about a patch that should disable swig "support" > > if the swig dir did not exist.. > > > > know of anyting else to try ? > > > > I have succeded in compiling owfs-1.0p0 with owhttpd (and this works can > > read temps and all) > > But owfs did not compile so no mount options.... , it complained about > > missing libfuse but this is installed as far as i can tell becuse > > owfs-2.1p0RC don´t complain about this... > > > > /Nils Nilsson > > ----- Original Message ----- > > From: "Alfille, Paul H.,M.D." <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Tuesday, September 20, 2005 2:54 PM > > Subject: RE: [Owfs-developers] Installing owfs > > > > > > try: > > .configure --disable-owperl --disable-owpython > > then 'make' and 'make install' > > > > It sounds like the swig setup is the problem, and swig has had a recent > > version > > change and I'm not sure it works currently. > > > > Paul > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] on behalf of Nils Nilsson > > Sent: Tue 9/20/2005 3:30 AM > > To: [email protected] > > Subject: [Owfs-developers] Installing owfs > > > > Hello > > Im having big problems trying to install owfs, hope someone can help me. > > > > Have done the following. > > > > Compiled a fresh 2.6.14 kernel with fuse built in. > > installed libfuse-dev (debian(working according to the ./configure)) > > and libusb (working according to the ./configure) > > > > downloaded > > owfs-2.1p0RC.tar.gz > > unpacked and rann ./configure > > > > and got the folowing error > > > > > > --snip-- > > config.status: error: cannot find input file: module/swig/perl5/Makefile.in > > --snip-- > > > > Have tried to remove the whole swig dir without success. > > > > Also got this warning > > configure: WARNING: SS is true > > > > /Nils Nilsson > > > > > > > > > > > > > > ------------------------------------------------------- > > SF.Net email is sponsored by: > > Tame your development challenges with Apache's Geronimo App Server. > > Download it for free - -and be entered to win a 42" plasma tv or your very > > own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php > > _______________________________________________ > > Owfs-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > > ------------------------------------------------------- > SF.Net email is sponsored by: > Tame your development challenges with Apache's Geronimo App Server. > Download it for free - -and be entered to win a 42" plasma tv or your very > own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
<<winmail.dat>>
