Hello from Gregg C Levine This raises some interesting issues here. I develop using Slackware, all of the 10 series releases are found here. My only problem is that a custom kernel is a requirement for FUSE. I'm going to be trying the latest and greatest OWFS software this week.
Given what our correspondent chose to test his OWFS setup with that will be my test vehicle. I'll know more by Friday at the latest. --- Gregg C Levine [EMAIL PROTECTED] --- "Remember the Force will be with you. Always." Obi-Wan Kenobi > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:owfs-developers- > [EMAIL PROTECTED] On Behalf Of paul > Sent: Sunday, February 12, 2006 1:03 PM > To: owfs-developers@lists.sourceforge.net > Subject: [Owfs-developers] FW: Your latest OWFS - Software > > Hmm... > > Let's look at this systematically. > > > 0. Did you make symlinks or a PATH change to put the installed owfs in your path? > 1. Are you runnking the program as root? > 2. Did you try "modprobe fuse" first? > > I develope with SuSE 9.3 so it can work. > > Paul Alfille > > Begin forwarded message: > > > Subject: Your latest OWFS - Software > > Date: 2/4/2006 3:56:27 PM > > From: Michael Holzbrecher > > > > Hi, > > > > I try since some days to get OWFS run. > > I tried to compile the source code owfs-2.1p0RC.tar.gz, but it failed > > with error message from make. > > Did'nt know how to fix it. > > Then I downloaded owfs-2.1.0-1.i386.rpm. owfshttpd is runnig fine. > > When I start OWFS and try to access my mounted /mnt/1-wire from owfs, it > > terminates. > > > > Today I downloaded owfs-2.2p0RC.tar.gz and compiled and installed it by > > make install. > > When I start owfs or owhttpd I see on my scope connected to the data pin > > of DS18S20 a periodic signal. > > But I cannot connect to the tcp port and I also cannot connect to > > /mnt/1-wire. OWFS does not terminate like on the older version. > > When I typ ls-l /mnt/1-wire nothing happens it just waits. > > > > The rpm version behaves same like my self compiled version. > > > > On the owfs-2.1.0-1.i386.rpm I could see in tail -f /var/log/messages: > > OWFS[9279]: Opened USB DS9490 adapter at 003/002 > > > > after start owfs or owfshttpd and the shell came back a couple of > > secounds after ./owfs /mnt/1-wire -u. > > The latest version does not come back. I must type ctrl-c to terminate. > > > > I'm running Suse 9.3 Kernel 2.6.11.4-21.10-default. > > > > Do you have any idea what to do to get owfs run ?? > > > > Best Regards, > > Michael > > > > Michael Holzbrecher > > > > > > > ------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. Do you grep through log files > for problems? Stop! Download the new AJAX search engine that makes > searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=1216 42 > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
