It appears that the write problem has been fixed.  However, I am now
having problems with reading.

I wrote a very simple C program that just does open, lseek, read, close.
If I attempt to read more than 4096 bytes from a DS1996 (with a single
call to "read"), it fails with errno EINVAL.

Also, if I read 10 bytes from offset 0, then try to read 20 bytes from
offset 0, "read" returns 10, indicating that it read only 10 bytes.  If
I wait for the cache to time out, or use "uncached", I don't experience
this problem.  I suspect that when reading from cache, the operation
terminates when it gets to a byte that is not cached, rather than
fetching the missing data from the device.
 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Spade,
Rod
Sent: Friday, May 19, 2006 9:04 AM
To: [email protected]
Subject: RE: [Owfs-developers] RE: problem writing to DS1996

Thanks for checking that.  We will give the latest release a try. 

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Alfille
Sent: Thursday, May 18, 2006 7:25 PM
To: [email protected]
Subject: Re: [Owfs-developers] RE: problem writing to DS1996

The current version seems to work. (I found a 1996 and tested it.)

Paul

On 5/17/06, Spade, Rod <[EMAIL PROTECTED]> wrote:
> Paul,
>
> Thanks for your quick response.
>
> The problem happens whether I copy a small file to pages/page.n via
the
> shell, or use a compiled C program to write to "memory" after doing an
> lseek.
>
> It appears that the offset of the first byte written into a page is
> being used as the most significant byte of the address.  So if I start
> writing at 0x0414, the data is stored at 0x1414 instead.  0x1304 goes
to
> 0x0404.  If the data extends beyond the end of the first page, the
> subsequent pages are always written to 0x00nn.
>
> Rod
>
>
> -----Original Message-----
> From: Paul Alfille <[EMAIL PROTECTED]>
> To: [email protected]
> Subject: Re: [Owfs-developers] problem writing to DS1996
> Date: Tue, 16 May 2006 15:42:33 -0400
> Reply-To: [email protected]
>
> Thanks for the report.
>
> A couple questions:
> 1. Can you analyze where the data is actually being written?
> 2. Are you using "memory" or "pages/page.n" are the target?
>
> Paul Alfille
>
> On Tuesday 16 May 2006 03:29 pm, Spade, Rod wrote:
> > I'm having a problem using OWFS 2.2p3 to write to a 64kb DS1996.
> > Writing into the first 256 bytes of the "memory" file works OK, but
> when
> > I write to other locations, the data ends up at the wrong address.
If
> I
> > immediately read back the data it looks OK, but if I do an uncached
> read
> > (or wait for the cache to time out), I don't get back what was
> written.
> >
> > I think that reading the memory is OK.  If I use the 1wire public
> domain
> > library "memutil" sample to write, I can read the data back with
OWFS
> > and everything looks good.  But when I write something to the same
> > location via OWFS, reading everything back shows that the data was
> > written to the wrong location in the memory.
> >
> > Has anyone else experienced this?
> >
> > Thanks for the help!
> >
> > Rod
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-us.falkag.net/sel?cmdlnk&kid0709&bid&3057&dat1642
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>


-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers


-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers


-------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0709&bid&3057&dat1642
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to