Ok, fixed the directory caching problem. Paul
On 5/23/06, Paul Alfille <[EMAIL PROTECTED]> wrote:
Thank you, Daniel! 1. Detection seems to work 2. 1-wire search fails after 27 of 64 steps, Not sure why. 3. Clearly a failed directory listing is getting cached -- unrelated error. I'll make some changes to see if we can figure out why the search is failing. It seems like a timing, hardware or driver problem, really. Paul On 5/23/06, Daniel Höper <[EMAIL PROTECTED]> wrote: > Hello Paul, > > this is the debug output from owserver: > > ~ $ /usr/bin/owserver --foreground --error_level 9 -p 2000 /dev/i2c-1 > CONNECT: Found an i2c device at /dev/i2c-1 address 24 > CONNECT: i2c device at /dev/i2c-1 address 24 cannot be reset > CONNECT: Found an i2c device at /dev/i2c-1 address 25 > CONNECT: i2c device at /dev/i2c-1 address 25 cannot be reset > CONNECT: Found an i2c device at /dev/i2c-1 address 26 > DEBUG: DS2482 read status ok > CONNECT: i2c device at /dev/i2c-1 address 26 appears to be DS2482-x00 > CALL: No message > CALL: owserver: parse path= > CALL: PARSENAME path=[] > CALL: Directory message > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > DEBUG: owserver dir pre = > CALL: DIRECTORY path= > DEBUG: Get from cache sn 00 00 00 00 00 00 00 00 in=0x134b8 index=0 > DEBUG: Found in cache > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DATA: BUS_first: No data will be returned > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=01 00 00 00 00 00 00 00 > DEBUG: Clearing root branch > DEBUG: owserver dir post = > CALL: owserver: parse path= > CALL: PARSENAME path=[] > CALL: Directory message > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > DEBUG: owserver dir pre = > CALL: DIRECTORY path= > DEBUG: Get from cache sn 00 00 00 00 00 00 00 00 in=0x134b8 index=0 > DEBUG: Found in cache > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DATA: BUS_first: No data will be returned > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=01 00 00 00 00 00 00 00 > DEBUG: Clearing root branch > DEBUG: DS2482 read status ok > DEBUG: DS2482 Reset > DEBUG: DS2482 read status ok > DEBUG: DS2482 read status ok > DEBUG: DS2482 read status ok > DEBUG: DS2482 Reset > DEBUG: DS2482 read status ok > DEBUG: DS2482 search bit number 0 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 1 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 2 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 3 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 4 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 5 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 6 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 7 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 8 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 9 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 10 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 11 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 12 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 13 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 14 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 15 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 16 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 17 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 18 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 19 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 20 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 21 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 22 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 23 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 24 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 1 0 1 > DEBUG: DS2482 search bit number 25 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: DS2482 read status ok > DEBUG: <- TRIPLET 0 1 0 > DEBUG: DS2482 search bit number 26 > DEBUG: -> TRIPLET attempt direction 0 > DEBUG: BUS_next return = -1 2C 0B B8 01 00 00 00 00 > DEBUG: owserver dir post = > CALL: owserver: parse path= > CALL: PARSENAME path=[] > CALL: Directory message > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > DEBUG: owserver dir pre = > CALL: DIRECTORY path= > DEBUG: Get from cache sn 00 00 00 00 00 00 00 00 in=0x134b8 index=0 > DEBUG: Found in cache > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DEBUG: owserver dir post = > CALL: owserver: parse path= > CALL: PARSENAME path=[] > CALL: Directory message > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > DEBUG: owserver dir pre = > CALL: DIRECTORY path= > DEBUG: Get from cache sn 00 00 00 00 00 00 00 00 in=0x134b8 index=0 > DEBUG: Found in cache > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last > path=00 00 00 00 00 00 00 00 > DEBUG: owserver dir post = > CALL: owserver: parse path=uncached > CALL: PARSENAME path=[uncached] > CALL: Directory message > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > DEBUG: owserver dir pre = uncached > CALL: DIRECTORY path=uncached > DEBUG: Start of directory path=uncached device=00 00 00 00 00 00 00 00 > DEBUG: Selecting a path (and device) path=uncached SN=00 00 00 00 00 00 00 > 00 last path=00 00 00 00 00 00 00 00 > DEBUG: owserver dir post = uncached > > On the client side I executed: > % OW::init 10.0.1.1:2000 > % OW::get > structure/ uncached/ bus.0/ settings/ system/ statistics/ > % OW::get > structure/ uncached/ bus.0/ settings/ system/ statistics/ > % OW::get > structure/ uncached/ bus.0/ settings/ system/ statistics/ > % OW::get > structure/ uncached/ bus.0/ settings/ system/ statistics/ > % OW::get uncached > structure/ bus.0/ settings/ system/ statistics/ > > I hope it helps. > (Hardware components and configuration have not changed) > > Daniel > > Am Samstag, 20. Mai 2006 17:52 schrieb Paul Alfille: > > Daniel, > > > > This is better than I expected. > > With your modifications, it sounds like: > > 1. The chip is detected > > 2. Reset and the start of a device search works. > > > > I'm uploading a more heavily "instrumented" version -- more debugging > > information -- which might help us figure out the problem. > > > > Paul > > > > On 5/20/06, Daniel Höper <[EMAIL PROTECTED]> wrote: > > > My first attempt with the current CVS version failed, owserver did not > > > print anything on the console. I cannot find where DS2482_detect() is > > > called, thus I added the following code to the switch() statement in > > > LibStart(): ... > > > case bus_i2c: > > > ret = DS2482_detect(in); > > > break; > > > > Exactly! Fixed. > > > > > ... > > > (Is this the right place and method to initialize the device?) > > > > > > Next problem is a segmentation fault in DS2482_channel_select() caused by > > > the head pointer which is NULL during initialization. In this case a > > > "return 0" should be sufficient for the DS2482-100. (probably I will > > > finish a test environment with a DS2482-800 in the next few days) > > > > Fixed. Thanks. > > > > > After this two modifications owserver shows the following: > > > > > > / $ /usr/bin/owserver --foreground --error_level 9 -p 2000 /dev/i2c-1 > > > CONNECT: Found an i2c device at /dev/i2c-1 address 24 > > > CALL: PARSENAME path=[] > > > CONNECT: Found an i2c device at /dev/i2c-1 address 25 > > > CALL: PARSENAME path=[] > > > CONNECT: Found an i2c device at /dev/i2c-1 address 26 > > > CALL: PARSENAME path=[] > > > CONNECT: i2c device at /dev/i2c-1 address 26 appears to be DS2482-x00 > > > CALL: No message > > > CALL: owserver: parse path=uncached > > > CALL: PARSENAME path=[uncached] > > > CALL: Directory message > > > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > > > DEBUG: owserver dir pre = uncached > > > CALL: DIRECTORY path=uncached > > > DEBUG: Start of directory path=uncached device=00 00 00 00 00 00 00 00 > > > DEBUG: Selecting a path (and device) path=uncached SN=00 00 00 00 00 00 > > > 00 00 last path=01 00 00 00 00 00 00 00 > > > DEBUG: Clearing root branch > > > DEBUG: BUS_next return = -1 2C 0B B8 01 00 00 00 00 > > > DEBUG: owserver dir post = uncached > > > CALL: owserver: parse path= > > > CALL: PARSENAME path=[] > > > CALL: Directory message > > > OWSERVER SpecifiedBus=0 pn->bus_nr=-1 > > > DEBUG: owserver dir pre = > > > CALL: DIRECTORY path= > > > DEBUG: Get from cache sn 00 00 00 00 00 00 00 00 in=0x134b8 index=0 > > > DEBUG: Found in cache > > > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > > > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 > > > last path=00 00 00 00 00 00 00 00 > > > DEBUG: BUS_next return = -1 2C 0B 00 00 00 00 00 00 > > > DEBUG: owserver dir post = > > > > > > > > > To communicate with the server I used owtcl on another machine: > > > > > > % OW::init 10.0.1.1:2000 > > > % OW::get uncached > > > structure/ bus.0/ settings/ system/ statistics/ > > > % OW::get > > > structure/ uncached/ bus.0/ settings/ system/ statistics/ > > > > > > There is only one chip connected to the 1-wire bus. > > > It's a DS2890, ID: "2C 0B B8 05 00 00 00 E2" > > > This ID is partially shown in the debug output (BUS_next). > > > > > > I restarted the machine and owserver several times and run "OW::get" but > > > there wasn't an entry in the directory for the chip. > > > > > > Daniel > > > > > > ------------------------------------------------------- > All the advantages of Linux Managed Hosting--Without the Cost and Risk! > Fully trained technicians. The highest number of Red Hat certifications in > the hosting industry. Fanatical Support. Click to learn more > http://sel.as-us.falkag.net/sel?cmdlnk&kid7521&bid$8729&dat1642 > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers >
------------------------------------------------------- All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more http://sel.as-us.falkag.net/sel?cmd=lnk&kid7521&bid$8729&dat1642 _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
