The LCD Driver has solder pads for 3 switch inputs so it should work, but I have not had any reports of people using it that way. You would just need to make sure that what you are going to sense is in the range of 0-5v DC.
Eric www.hobby-boards.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Duda Sent: Saturday, June 10, 2006 1:44 PM To: [email protected] Subject: Re: [Owfs-developers] Looking for a One Wire Latched Sensor Hobby-boards puts a DS2408 on their LCD driver board. I might be able to use that. Has anyone attempted to adapt this board for use in a door bell sensor? Jim Jim Duda wrote: > Does anyone know of a board/kit available with a DS2508? > > Jim > > Paul Alfille wrote: > >>DS2408 >> >>On 6/10/06, Jim Duda <[EMAIL PROTECTED]> wrote: >> >> >>>I have an application where I want to sense a logic transition on a >>>signal, and have it's value latched until I read it. I looked >>>through all the DS devices types in the documentation, but nothing >>>popped out which would satisfy my needs. >>> >>>I'm hoping to somehow sense a door bell button activation and detect >>>it via one wire. >>> >>>Jjim >>> >>> >>> >>>_______________________________________________ >>>Owfs-developers mailing list [email protected] >>>https://lists.sourceforge.net/lists/listinfo/owfs-developers >>> _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
