Andrew, Here is my working output:
<start> [EMAIL PROTECTED] mnt]# /opt/owfs/bin/owfs -u --mountpoint /mnt/1-wire/ --foreground --error_level=9 CONNECT: fuse mount point: /mnt/1-wire/ CALL: PARSENAME path=[] CONNECT: Adapter found: 003/002 DEFAULT: Opened USB DS9490 adapter at 003/002. DATA: DS9490_setup_adapter: done (ret=0) DATA: DS9490_overdrive() DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 DATA: BUS_first: No data will be returned DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last path=01 00 00 00 00 00 00 00 DEBUG: Clearing root branch DATA: DS9490_reset DATA: DS9490_reset: ok DATA: DS9490_reset DATA: DS9490_reset: ok DEBUG: DS9490_next_both SN found: 26 95 CD 6C 00 00 00 77 DEBUG: BUS_next return = 0 26 95 CD 6C 00 00 00 77 DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 last path=00 00 00 00 00 00 00 00 DATA: DS9490_reset DATA: DS9490_reset: ok DEBUG: DS9490_next_both SN found: 81 30 C6 26 00 00 00 80 DEBUG: BUS_next return = 0 81 30 C6 26 00 00 00 80 CONNECT: Good DS1421 tag found for 003/002 DEFAULT: Set DS9490 003/002 unique id to FFFFFF81 30 FFFFFFC6 26 00 00 00 FFFFFF80 DEBUG: fuse_mnt_opt=[(null)] DEBUG: fuse_open_opt=[(null)] unique: 1, opcode: INIT (26), nodeid: 0, insize: 56 INIT: 7.6 INIT: 7.5 unique: 1, error: 0 (Success), outsize: 40 </start> I hope it is of any help. Cheers, Egon > Hi Egon, > > Glad to help. > > I'm still facing a few challenges with OWFS myself. Basically, I can > start > owfs OK but when I use 'ls', I get nothing or if I use 'tree' I just get a > "dot". So so far, it's useless to me. > > My shell output is: > > </start> > [EMAIL PROTECTED] onewire]# /opt/owfs/bin/owfs -u --mountpoint /mnt/onewire/ > --foreground --error_level=9 > CONNECT: fuse mount point: /mnt/onewire/ > CALL: PARSENAME path=[] > CONNECT: Adapter found: 002/002 > DEFAULT: Opened USB DS9490 adapter at 002/002. > DATA: DS9490_setup_adapter: done (ret=0) > DATA: DS9490_overdrive() > DEBUG: Start of directory path= device=00 00 00 00 00 00 00 00 > DATA: BUS_first: No data will be returned > DEBUG: Selecting a path (and device) path= SN=00 00 00 00 00 00 00 00 > last > path=01 00 00 00 00 00 00 00 > DEBUG: Clearing root branch > DATA: DS9490_reset > DATA: DS9490_reset: ok > DATA: DS9490_reset > DATA: DS9490_reset: ok > DEBUG: DS9490_next_both SN found: 81 3C 67 25 00 00 00 8B > DEBUG: BUS_next return = 0 81 3C 67 25 00 00 00 8B > CONNECT: Good DS1421 tag found for 002/002 > DEFAULT: Set DS9490 002/002 unique id to FFFFFF81 3C 67 25 00 00 00 > FFFFFF8B > DEBUG: fuse_mnt_opt=[(null)] > DEBUG: fuse_open_opt=[(null)] > unique: 2, opcode: INIT (26), nodeid: 0, insize: 44 > INIT: 5.1 > INIT: 5.1 > unique: 2, error: 0 (Success), outsize: 24 > unique: 3, opcode: STATFS (17), nodeid: 0, insize: 36 > unique: 3, error: 0 (Success), outsize: 64 > </start> > > I wondered if you could please post the shell output that you get when you > enter the line: > '/opt/owfs/bin/owfs -u --mountpoint /mnt/1-wire/ --foreground > --error_level=9' > > Thanks, > > Andrew > > On Wednesday 13 September 2006 22:44, E. Kastelijn wrote: >> Andrew, >> >> You made me very happy! >> This solved my problem and owfs now works fine. >> >> Strange enough I could not find the option you mentioned in the owfs man >> page. ;) >> >> Thanx again! >> >> kind regards, >> >> Egon >> >> > Hi Egon, >> > >> > I had that problem with owfs until I includeed '--mountpoint' before >> the >> > directoy (thanks Paul). Have you tried that ? >> > >> > example: >> > /opt/owfs/bin/owfs -u --mountpoint /mnt/1-wire/ --foreground >> > --error_level=9 >> > >> > Cheers, >> > >> > Andrew >> > >> > On Wednesday 13 September 2006 15:01, E. Kastelijn wrote: >> >> Paul, >> >> >> >> I untarred the source again and configured with "./configure >> >> --disable_swig". This gives me the same results: >> >> >> >> # /opt/owfs/bin/owfs -u /mnt/1-wire/ --foreground --error_level=9 >> >> DEFAULT: Not a "character" device /mnt/1-wire/ >> >> DEFAULT: Not a "character" device /mnt/1-wire/ >> >> (and many more) >> >> >> >> I have looked into the source code a little and found the message in >> >> owlib/src/c/ow_opt.c on line 393. >> >> >> >> In my opinion the program sees my target mountpoint as an input >> device. >> >> Does it skip the '-u' parameter somehow? >> >> >> >> kind regards, >> >> >> >> Egon >> >> >> >> ps: >> >> The strange thing is: After I have runned owfs, my digitemp >> application >> >> can also not access my sensors anymore. >> >> >> >> > I'll have to find the location of that libusb dependency. >> >> > >> >> > For now, configure with "./configure --disable_swig" >> >> > >> >> > Paul >> >> > >> >> > On 9/5/06, E. Kastelijn <[EMAIL PROTECTED]> wrote: >> >> >> >> ------------------------------------------------------------------------ >> >>- Using Tomcat but need to do more? Need to support web services, >> >> security? >> >> Get stuff done quickly with pre-integrated technology to make your >> job >> >> easier Download IBM WebSphere Application Server v.1.0.1 based on >> Apache >> >> Geronimo >> >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> >> _______________________________________________ >> >> Owfs-developers mailing list >> >> [email protected] >> >> https://lists.sourceforge.net/lists/listinfo/owfs-developers >> >> ------------------------------------------------------------------------- >> Using Tomcat but need to do more? Need to support web services, >> security? >> Get stuff done quickly with pre-integrated technology to make your job >> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache >> Geronimo >> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 >> _______________________________________________ >> Owfs-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/owfs-developers > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
