Hello, I have a board with 2 DS2450 a/d, 1 DS2431 eeprom and a DS2482 as the bus master. The host processor is a 500 Mhz Geode running Linux. I've noticed that there is quite a bit of latency when doing an "ls" on the 1 wire mount point or reading any channel of either 2450. For example, reading a 2450 channel can take from 8 - 15 seconds. Once the value is in cache, it pops right up. There is a bit of latency with my smbus smartbattery and temperature devices but its no where near the OW delay.
I've read the OWFS Cache page so I understand reading data will be "relatively slow". That being said, is the delay I'm seeing typical of the OWFS? I'm just trying to rule out a problem with my hardware or elsewhere. regards. Bob ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
