I just updated one of my routers to 0.9, and it seems to work so far.
I upgraded with this firmware:
<http://downloads.openwrt.org/whiterussian/0.9/default/openwrt-wrt54g-squash
fs.bin>
http://downloads.openwrt.org/whiterussian/0.9/default/openwrt-wrt54g-squashf
s.bin
[EMAIL PROTECTED]:/etc # echo "src owfs
http://owfs.sourceforge.net/openwrt/packages"; >> /etc/ipkg.conf
[EMAIL PROTECTED]:/etc# cat /etc/ipkg.conf
src whiterussian http://downloads.openwrt.org/whiterussian/packages
src non-free http://downloads.openwrt.org/whiterussian/packages/non-free
dest root /
dest ram /tmp
src owfs http://owfs.sourceforge.net/openwrt/packages
[EMAIL PROTECTED]:/etc# ipkg update
Downloading http://downloads.openwrt.org/whiterussian/packages/Packages
Updated list of available packages in /usr/lib/ipkg/lists/whiterussian
Downloading
http://downloads.openwrt.org/whiterussian/packages/non-free/Packages
Updated list of available packages in /usr/lib/ipkg/lists/non-free
Downloading http://owfs.sourceforge.net/openwrt/packages/Packages
Updated list of available packages in /usr/lib/ipkg/lists/owfs
Successfully terminated.
[EMAIL PROTECTED]:/etc# ipkg install owfs
Installing owfs (2.6p4-9) to root...
Downloading
http://owfs.sourceforge.net/openwrt/packages/./owfs_2.6p4-9_mipsel.ipk
Installing libpthread (0.9.27-1) to root...
Downloading
http://downloads.openwrt.org/whiterussian/packages/libpthread_0.9.27-1_mipse
l.ipk
Installing owlib (2.6p4-9) to root...
Downloading
http://owfs.sourceforge.net/openwrt/packages/./owlib_2.6p4-9_mipsel.ipk
Installing libusb (0.1.10a-1) to root...
Downloading
http://downloads.openwrt.org/whiterussian/packages/libusb_0.1.10a-1_mipsel.i
pk
Installing kmod-fuse (2.4.30+2.4.2-brcm-1) to root...
Downloading
http://owfs.sourceforge.net/openwrt/packages/./kmod-fuse_2.4.30+2.4.2-brcm-1
_mipsel.ipk
Installing libfuse (2.4.2-1) to root...
Downloading
http://owfs.sourceforge.net/openwrt/packages/./libfuse_2.4.2-1_mipsel.ipk
Installing fuse-utils (2.4.2-1) to root...
Downloading
http://owfs.sourceforge.net/openwrt/packages/./fuse-utils_2.4.2-1_mipsel.ipk
Configuring fuse-utils
Configuring kmod-fuse
Configuring libfuse
Configuring libpthread
Configuring libusb
Configuring owfs
Configuring owlib
Edit /etc/default/owserver and add some fake-adapters.
OPTIONS="--fake 28 --fake 10 -p 3002"
[EMAIL PROTECTED]:/etc/default# run-owfs
Using /lib/modules/2.4.30/fuse.o
[EMAIL PROTECTED]:/etc/default# ls -l /tmp/1wire/
drwxrwxrwx 1 root root 8 Jan 1 00:04 10.67C6697351FF
drwxrwxrwx 1 root root 8 Jan 1 00:04 28.4AEC29CDBAAB
drwxr-xr-x 1 root root 8 Jan 1 00:02 alarm
drwxr-xr-x 1 root root 8 Jan 1 00:02 bus.0
drwxr-xr-x 1 root root 8 Jan 1 00:02 settings
drwxrwxrwx 1 root root 8 Jan 1 00:04 simultaneous
drwxr-xr-x 1 root root 8 Jan 1 00:02 statistics
drwxr-xr-x 1 root root 30 Jan 1 00:02 structure
drwxr-xr-x 1 root root 8 Jan 1 00:02 system
drwxr-xr-x 1 root root 8 Jan 1 00:02 uncached
[EMAIL PROTECTED]:/etc/default# cat /tmp/1wire/10.67C6697351FF/temperature
91.6195
This is the complete list of installed packages in my router.
http://home.mag.cx/openwrt/0.9/list_installed_0.9.txt
It seems like you have an old kernel installed.. 2.4.30-brcm-3
I have 2.4.30-brcm-5 and I don't know if this could effect the problem. Do
you have a fresh upgraded router?
/Christian
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul
Alfille
Sent: den 4 juni 2007 21:56
To: owfs-developers@lists.sourceforge.net
Subject: Re: [Owfs-developers] Fwd: 1-wire
"Γιώργος Μπόλλας (Yorgos Bollas)"
to palfille
i tried to install owfs on openwrt 0.9 whiterussin with
echo "src owfs http://owfs.sourceforge.net/openwrt/packages"; >>
/etc/ipkg.conf
ipkg install owfs
and i get
ERROR: Cannot satisfy the following dependencies for owfs:
libpthread libpthread kernel ( 2.4.30-brcm-3) libpthread
obviously libpthread does not exit in the repository
what do i do now ?
On 6/4/07, Eric Allen <[EMAIL PROTECTED]> wrote:
I have it running on whiterussian 0.9 perfectly installed through ipkg.
On 6/4/07, Paul Alfille <[EMAIL PROTECTED]> wrote:
> ---------- Forwarded message ----------
> From: "Γιώργος Μπόλλας (Yorgos Bollas)" <[EMAIL PROTECTED]>
> Date: Jun 4, 2007 8:26 AM
> Subject: 1-wire
> To: [EMAIL PROTECTED]
>
> the 1-wire for wrt-54g does it work with standard whiterussian 0.9 ?
> i dont want to put extra firmware (unless yours is based on white
> russian 0.9)
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
