From: Bernard Trégon To: Alfille, Paul H.,M.D. Cc: Francis Hulin-Hubard Subject: Fox board Hardware for DS18s20 connection
Dear sir, very interested in using a DS18s20 through a fox board, i've tried to realise the schematics described on your host adaptaters web page (to connect the DS1820 through the serial port), whithout results at this time. I tried to use the run-owfs script to start owserver, owhttpd and owfs, as described on the fox board site 1-wire page, but it doesn't seem to work. Can you tell me which hardware configuration to use for this application . Thanks in advance for your answer. Best regards -- ___________________________________________________________________ Bernard TREGON - Ingénieur de Recherche ~ Laboratoire Kastler Brossel ~ CNRS UMR8552 (Ecole Normale Supérieure) ~ 24 rue Lhomond ~ 75231 PARIS Bureau GH25 Poste : 01 44 32 35 96 Fax : 01 44 32 34 34 ___________________________________________________________________ The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
