Christian Magnusson <mag <at> mag.cx> writes: > > > Starting owserver without --altUSB option is the same as setting: > bash-3.2# echo 1 > /tmp/1wire/bus.0/system/adapter/overdrive.0 > bash-3.2# echo 5 > /tmp/1wire/bus.0/system/adapter/pulldownslewrate.0 > bash-3.2# echo 4 > /tmp/1wire/bus.0/system/adapter/writeonelowtime.0 > bash-3.2# echo 4 > /tmp/1wire/bus.0/system/adapter/datasampleoffset.0 > > Starting owserver WITH --altUSB option is the same as setting: > bash-3.2# echo 1 > /tmp/1wire/bus.0/system/adapter/overdrive.0 > bash-3.2# echo 3 > /tmp/1wire/bus.0/system/adapter/pulldownslewrate.0 > bash-3.2# echo 2 > /tmp/1wire/bus.0/system/adapter/writeonelowtime.0 > bash-3.2# echo 5 > /tmp/1wire/bus.0/system/adapter/datasampleoffset.0 > (This setting have been reported to work for some AAG user before) > Removed with ipkg both owlib and owfs. I made a little mistake , the owlib was not up to date. Now after the fresh installation (both at 2.6p5-15) i have the overdrive.0 at 1 just after the reboot.
BTW the problem is still there, i set the value of the others parameter as indicate by you , even if the value indicated for writeonelowtime is out of range (i look at the code and i see that what you indicate as 2 should be 10). Last but not least , the crc16 errors are back again. Giuliano ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
