Hi Christian, i build new PCB for DS2480. I install all package from web server. When i connect DS2480 via MAX3232 to PC and run Ibutton Tmex then i view all 1wire device (18b20 and other). When i connect DS2480 to second serial port in router and run linux this is message from telnet :
midge# insmod fuse midge# rmmod fuse adm5120gpio: switch gpio 14 to INPUT adm5120gpio: switch gpio 13 to INPUT i2c-core.o: i2c core module version 2.10.1 (20060924) i2c-adm5120.o: ADM5120 I2C Driver V1.1 i2c-adm5120.o: SCL=GPIO-01, SDA=GPIO-03 i2c-dev.o: i2c /dev entries driver module version 2.10.1 (20060924) i2c-dev.o: Registered 'ADM5120 I2C' as minor 0 fuse init (API version 7.2) fuse distribution version: 2.4.2 fuse exit midge# owserver --foreground --error_level=5 --error_print=2 -p 3002 -d /dev/tty S1 CALL: PARSENAME path=[] CONNECT: Cannot detect DS2480 or LINK interface on /dev/ttyS1. DEBUG: COM_close: flush DEBUG: COM_close: restore DEBUG: COM_close: close CALL: PARSENAME path=[] DEFAULT: Cannot detect DS9097 (passive) interface on /dev/ttyS1. DEBUG: COM_close: flush DEBUG: COM_close: restore DEBUG: COM_close: close DEBUG: main_threadid = 1024 DEBUG: ServerProcessOut = 1026 DEBUG: ServerProcessAccept 3002[1026] try lock 0 i test connect the second serial port router into max3232 to PC. All works in 9600Bd (TX and RX). Greets Vlada P.S. in new PCB i have digital isolator from 3V to 5V and back (ADUM1402). > >I hope you installed the packages from >http://owfs.sourceforge.net/openwrt/midge/packages/ >Did you forget to update the new owlib package? It looks like you only >updated the binaries, and not the owlib. > >I hope you have added the new repository to your config-file. (and make sure >you don't have any other old owfs-repositories in the config-file) ># echo "src owfs http://owfs.sourceforge.net/openwrt/midge/packages/"; >> >/etc/ipkg.conf ># ipkg update ># ipkg install owlib owfs owshell > >"ipkg upgrade" is not recommended anymore since it's hard to know what >happens after the upgrade. >The command is actually disabled in newer kamikaze releases. > >After you have updated the packages owfs, owlib and owshell, it's time to do >debug owserver. > >What does owserver say when you start it in foreground and debug-output >turned on? ># owserver --foreground --error_level=5 --error-print=2 -p 3002 -d >/dev/ttyS1 > >I don't understand what you mean with "8;" ? Can't you login to your router >any more? Is it not responding to ping either any more? > >BTW: did the kernel module work for you? (eg. is it possible to load and >unload the module?) >This is how it looks on my router. ># insmod fuse ># rmmod fuse ># dmesg | tail >fuse init (API version 7.2) >fuse distribution version: 2.4.2 >fuse exit > >/Christian > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
