---------- Forwarded message ----------
From: Brian Fahrlander <[EMAIL PROTECTED]>
Date: Sep 8, 2007 6:59 PM
Subject: LCD board question
To: Paul Alfille <[EMAIL PROTECTED]>
I have the Hobby-Boards.com board; type 29, etc...and I've added the
three switches to the spare ports, but flipping switches doesn't seem to
make any difference, I noticed that it mentioned something about "the
gpio data doesn't mean anything if they're initialized for output..."
Here's the device:
drwxrwxrwx 1 root root 8 Sep 8 17:50 LCD_H
drwxrwxrwx 1 root root 8 Sep 8 17:58 LCD_M
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.0
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.1
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.2
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.3
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.4
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.5
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.6
-rw-rw-rw- 1 root root 1 Sep 8 17:58 PIO.7
-rw-rw-rw- 1 root root 15 Sep 8 17:58 PIO.ALL
-rw-rw-rw- 1 root root 12 Sep 8 17:58 PIO.BYTE
-r--r--r-- 1 root root 16 Sep 8 17:41 address
-r--r--r-- 1 root root 2 Sep 8 17:41 crc8
-r--r--r-- 1 root root 2 Sep 8 17:41 family
-r--r--r-- 1 root root 12 Sep 8 17:41 id
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.0
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.1
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.2
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.3
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.4
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.5
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.6
-rw-rw-rw- 1 root root 1 Sep 8 17:58 latch.7
-rw-rw-rw- 1 root root 15 Sep 8 17:58 latch.ALL
-rw-rw-rw- 1 root root 12 Sep 8 17:58 latch.BYTE
-r--r--r-- 1 root root 16 Sep 8 17:41 locator
-rw-rw-rw- 1 root root 1 Sep 8 17:58 por
-r--r--r-- 1 root root 1 Sep 8 17:58 power
-r--r--r-- 1 root root 1 Sep 8 17:58 present
-r--r--r-- 1 root root 16 Sep 8 17:41 r_address
-r--r--r-- 1 root root 12 Sep 8 17:41 r_id
-r--r--r-- 1 root root 16 Sep 8 17:41 r_locator
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.0
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.1
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.2
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.3
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.4
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.5
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.6
-r--r--r-- 1 root root 1 Sep 8 17:58 sensed.7
-r--r--r-- 1 root root 15 Sep 8 17:58 sensed.ALL
-r--r--r-- 1 root root 12 Sep 8 17:58 sensed.BYTE
-rw-rw-rw- 1 root root 12 Sep 8 17:58 set_alarm
-rw-rw-rw- 1 root root 1 Sep 8 17:58 strobe
-r--r--r-- 1 root root 32 Sep 8 17:41 type
This is the way the device has always looked...and "sensed.3" is
stuck at 1....I think the switches should be on lines 0,1, and 2 from
the LCD schematic. At least that's what I'm seeing. (Other than no
change when I flip.)
:)
Is there smoething I'm missing?
--
------------------------------------------------------------------------
Brian Fahrländer Christian, Conservative, and Technomad
Evansville, IN http://Fahrlander.net/brian
ICQ: 5119262 AOL/Yahoo/GoogleTalk: WheelDweller
------------------------------------------------------------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
