Paul, Got it all working!
Thanks for the help! Paul Alfille wrote: > On Tue, Jun 3, 2008 at 9:55 PM, Jason Antman <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > 1) Do I need to restart OWFS after adding a device, or can I just keep > everything as is and plug in the temperature probe? > 2) More important - am I correct in my findings that my DS18S20P > (sampled from Maxim) does NOT require Vdd to be shorted to ground for > parasite power? I've tried it both ways... > > > Great. Should be a simple fix. > > To answer your questions: > > 1. No (though it might be easier). The bus contents are "cached" for > up to 2 minutes. If you use the "uncached" directory, you should force > an immediate re-read. > 2. According to the datasheet (for the DS18S20-PAR which I assume is > what you have) http://datasheets.maxim-ic.com/en/ds/DS18S20-PAR.pdf > pin 3 is NC -- not connected. > > Paul Alfille > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ------------------------------------------------------------------------ > > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
