Hallo Another OWFS / Fox /USB problem.
I could get libusb and owfs (owlib,owserver) to compile. I used the libusb that came with CrisOS (version 0.1.12). I have used a version of OWFS which I found on www.mag.cx and then ported it to i686. However, I am not sure if this was the correct idea. When Fox boots, I log in as root and then try to run owserver with a USB device. Command is as follows: owserver -u all -p 3000 --foreground --error_level 9 --error_print 2 Output is: CONNECT: GetAddrInfo error Servname not supported for ai_socktype CONNECT: Cannot open server at all CALL: PARSENAME path=[] Segmentation fault # Any idea what this can be ? What I can look for ? This is the message from dmesg: owserver (pid 702) segfaults for page address 00000000 at pc 355cb23c This is what logread reports: Oct 29 22:58:00 CrisOs user.notice kernel: owserver (pid 702) segfaults for page address 00000000 at pc 355cb23c And lastly the output from /proc/bus/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 2.06 S: Manufacturer=Linux 2.6.25.16 hc-crisv10 S: Product=ETRAX 100LX USB Host Controller (2.6.25-rc9 port) S: SerialNumber=hc-crisv10.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04fa ProdID=2490 Rev= 0.02 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=10ms E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=10ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 16 Ivl=0ms I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 32 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Hope this helps. Jos -- Jos Hartman CAVOK Software Systems GmbH Windentalstrasse 356 CH-5704 Egliswil Switzerland Web: http://www.cavok.eu.com Tel: +41 62 775 09 12 Fax: +41 79 676 11 23 ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
