My sensors are powered, the temperature sensors are a mix of DS18B20 and
DS18S20, I just used DS1820 as a generic term.

Is there a way to use simultaneous conversion with pyowfs?

Thanks
Mick


On Sat, 2011-02-05 at 02:00 +0100, patyrk wrote:
> Dnia 2011-02-04, piÄ… o godzinie 22:44 +0000, Mick Sulley pisze:
> > Hi,
> > 
> > I am using pyowfs to read 20 DS1820 temperature sensors and 6 DS2406 I/O
> 
> AFAIK if you're using parasite power reading temperature will take this
> long. The transfer does not take as much but the conversion(preparing
> the data in ds1820) takes time. I have some ds18b20 and the reading
> takes about a second each.
> I think but I'm not sure that using external power and sending
> conversion signal to all ds18b20 will shorten the reading time because
> the conversion will takie place simultaneously.
> 
> And here's a question I would like to ask. Why isn't possible to use
> simultaneous/temperature with parasite power? I it because after reading
> the first ds18b20 and therefore pulling the line low others will loose
> power?
> 
> 
> Another idea is to use fasttemp, ds18b20 has this feature of different
> resolution. Check the data sheet for details. But you wrote that you are
> using ds1820 and it's an older design.
> 
> P4trykx
> 
> 
> 
> 
> ------------------------------------------------------------------------------
> The modern datacenter depends on network connectivity to access resources
> and provide services. The best practices for maximizing a physical server's
> connectivity to a physical network are well understood - see how these
> rules translate into the virtual world? 
> http://p.sf.net/sfu/oracle-sfdevnlfb
> _______________________________________________
> Owfs-developers mailing list
> Owfs-developers@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/owfs-developers


------------------------------------------------------------------------------
The modern datacenter depends on network connectivity to access resources
and provide services. The best practices for maximizing a physical server's
connectivity to a physical network are well understood - see how these
rules translate into the virtual world? 
http://p.sf.net/sfu/oracle-sfdevnlfb
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to