Hi Chris, On 03/21/2011 08:46 AM, Chris Boot wrote:
> Hi folks, > > Well I'm progressing well with my 1-Wire bus master over IP. I don't > have the bus locking in place yet but the code is in for owfs to use the > bus master and things work. Perhaps I am missing the obvious, or you're talking about something entirely different, but would it not be possible to use the ser2net/RFC 2217 support that Paul added to owlib in December 2010/January 2011 for what you are trying to do? Cheers, Eloy Paris.- > > The trouble I ran into is that as my code is based on the EtherWeather > driver, it has the ADAP_FLAG_no2409path flag set, which means it won't > look down DS2409 branches at all. However, if I remove the flag, things > appear to work just fine - except I can also see 1-wire devices from the > parent branch in sub-branches. > > What do I need to do, either in my bus master or in my owfs driver, to > get it to work "properly" and not show devices on the main bus when > looking at a branch? > > Thanks, > Chris > ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
