So I am back again with my I/O board problem from before. It has the DS2408 chip. Eric checked the board for me and found it working correctly. When I add the I/O board and the moisture meter (DS2760 chip) to the 1wire bus (both from Hobby Boards) I have this problem.The DS2760 is available from owhttpd and ownet.php but the DS2408 is dropped from the bus listing and is not accessible. When I remove the DS2760 from the 1wire bus the DS2408 is back again and accessible. These 2 boards worked on the same bus in earlier versions of owfs, I don't remember which but have had problems for several versions recently.
I need some suggestions on how to debug this problem. I have owtraffic enabled but debuglevel is set at 1. I am not getting any error messages. ------------------------------------------------------------------------------ Fulfilling the Lean Software Promise Lean software platforms are now widely adopted and the benefits have been demonstrated beyond question. Learn why your peers are replacing JEE containers with lightweight application servers - and what you can gain from the move. http://p.sf.net/sfu/vmware-sfemails _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
