Hi Ja, Aaaah, OK, that's it!!! After configuring, I will set the por=0 and from time to time I will check whether it is on 1. If it is 1 it need to be configured again - yes, that will work :-) But it looks like this is only at DS2408 possible, not on DS2450 and not on BAE0910 and it is no generic feature...
Thanks for the hint Achim Jan Kandziora wrote: > > Am Dienstag, 23. August 2011, 17:19:04 schrieb ekgnkb3d: >> >> Is there a general way to detect that the device configuration needs to >> be >> resend? A kind of "power-on-reset detect".... >> I guess this is important for all output devices as well as for some more >> complex input devices to prevent a manual reset of the application. >> > If there is a DS2408 (or DS2408 emulation) on the slave board, you can > sample > its "por" node. > > Kind regards > > Jan > > > ------------------------------------------------------------------------------ > EMC VNX: the world's simplest storage, starting under $10K > The only unified storage solution that offers unified management > Up to 160% more powerful than alternatives and 25% more efficient. > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > -- View this message in context: http://old.nabble.com/How-to-detect-lost-configuration-%28e.g.-in-BAE0910%29-tp32319775p32322860.html Sent from the OWFS - Dev mailing list archive at Nabble.com. ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
