On Jun 6, Paul Alfille <paul.alfi...@gmail.com> wrote:
> owfs does support telnet (RFC2217) control of the serial port for most
> of the serial adapters.
> It was tested with ser2net.
>
> For example, with a DS9097U adapter, instead of
>
> /opt/owfs/bin/owserver -d /dev/ttyS0
>
> do
>
> /opt/owfs/bin/owserver -d 192.168.1.23:10001 # assuming that's the
> right address and port.
>
> This has been tested with the DS9097U, DS9097E, LINK and HA5.
Hi Paul!
It's been some time, but I finally managed to test your instructions. And it
works :)
For reference: Here are the settings I used:
,-----------------------------------------------------------------------------.
| Precidia Ether232Plus Configuration v4.01.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | Serial Port Settings: |
| | |
| 1) Ethernet: 192.168.10.102 | A) Protocol: Transparent (srv) |
| | B) Port Setting: 9600 bps 8N1 [no] |
| 2) Serial Port: Transparent | C) Port Mode: RS-232 |
| | D) Connection Control: Net-Linked |
| | |
| | E) Local Port: 1000 |
| | F) Remote IP: 0.0.0.0 |
| | G) Remote Port: 0 |
| | H) Fallback IP: 0.0.0.0 |
| | I) Fallback Port: 0 |
| | |
| *) Save Current Configuration | J) Packet Prefix: none |
| -) Exit Configuration (no save) | K) Max Inter-Char Delay: 100 |
| $) Security Settings | L) Preferred Packet Size: 0 |
| #) System Settings | |
| ?) Refresh this Screen | M) Initial String: (not set) |
`-----------------------------------------------------------------------------'
thanks!
Markus
--
__________________ /"\
Markus Gaugusch \ / ASCII Ribbon Campaign
markus(at)gaugusch.at X Against HTML Mail
/ \
------------------------------------------------------------------------------
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
http://p.sf.net/sfu/rim-devcon-copy2
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
