Hello Silvio, did you alread try to write directly to the fuse-filesystem?
I set outputs manually by first changing directory into the appropriate DS2408 in the terminal and echoing the valu to the PIO file with: mnm@razmataz /mnt/1wire/29.646C08000000 $ echo "1" > PIO.0 queering the PIO afterwards shows mnm@razmataz /mnt/1wire/29.646C08000000 $ cat PIO.0 1 queering the sensed.0 shows correctly (inverse logic!) mnm@razmataz /mnt/1wire/29.646C08000000 $ cat sensed.0 0 This way you can narrow down where the problem is. Hope this helps, Martin On 11/03/2012 09:31 AM, Silvio Schmieder wrote: > > Hello, > I need help to switch the PIO's on DS2408. I use the original owfs package > 2.8p13 on openwrt but I tried 2.8p4-2 too. The result was a fantastic > working owfs only switching the PIO's doesn't work. If I want to set one PIO > separate via owwrite xxxxx/PIO.1 1 or owhttpd nothing happens. If I set the > command PIO.byte 1 all outputs switch correctly together. Is there sombody > who have experience with this problem? Did I make some mistake or is the > OpenWrt owfs package wrong compiled maybe. I'm searching for a solution for > weeks but I can't fix the problem. I use the DS9490R and a Netgear > WNDR3700v2 running OpenWrt Attitude Adjustment (12.09-beta) but on Backfire > it doesn't works too. > If I run OWFS on my PC all works how it should. > > Please help me...thanks. > > Regards Silvio > ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
