On Thu, May 9, 2013 at 11:26 AM, Mick Sulley <[email protected]> wrote: > Did you sudo it? I think the -u option only works with sudo > > > > On 09/05/13 15:22, Peter Hollenbeck wrote: > > Thanks for the suggestion. > I installed the modules as you suggested but I still get the same error. > owfs -u -m 1wire > fuse: device not found, try 'modprobe fuse' first > > modprobe fuse appears to do nothing. > lsmod shows: > Module Size Used by > > whereas the RPi where owfs is running successfully (rpiB), shows: > Module Size Used by > fuse 66685 3 > snd_bcm2835 19889 0 > snd_pcm 74834 1 snd_bcm2835 > snd_seq 52536 0 > snd_timer 19698 2 snd_seq,snd_pcm > snd_seq_device 6300 1 snd_seq > snd 52489 5 > snd_seq_device,snd_timer,snd_seq,snd_pcm,snd_bcm2835 > snd_page_alloc 4951 1 snd_pcm > pl2303 11771 1 > usbserial 34545 3 pl2303 > > I don't really understand modprobe and modules. I'm sure that a modprobe > command is not being issued on rpiB. Yet fuse is in the lsmod list. I > presume this means it is loaded, and not compiled into the kernel. Is this > correct? > > Thanks for your help. > Peter > > > > > On Thu, May 9, 2013 at 1:21 AM, Mick Sulley <[email protected]> wrote: >> >> I seem to remember that you need to install something else related to >> fuse, from my list of stuff to install try - >> sudo apt-get install libfuse-dev -y >> sudo apt-get install fuse-utils -y >> >> See if that helps >> Mick >> >> >> On 09/05/13 01:13, Peter Hollenbeck wrote: >> >> I am running owfs successfully on one RPi. >> I am trying to run it on another and have a problem. >> I enter: >> owfs -u -m 1wire >> and get: >> fuse: device not found, try 'modprobe fuse' first >> >> I tried modprobe fuse. no help. >> >> I think both RPis are running 2013-02-09-wheezy-raspbian >> >> I would appreciate suggestions. >> Thank you, >> Peter >> _______________________________________________ >> Owfs-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/owfs-developers
Hello! Peter, try this: Open a terminal window and then enter that string command. It should enter you into an elevated, read root shell. Then ask the system about those modules. Ideally those other packages are needed for managing the FUSE system, the ones that end on -dev are used if you plan on rebuilding the entire OWFS system from source code. The utility one is used for the obvious, managing the whole business. If that doesn't work you might need to reinstall everything. ----- Gregg C Levine [email protected] "This signature fought the Time Wars, time and again." ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. This 200-page book is written by three acclaimed leaders in the field. The early access version is available now. Download your free book today! http://p.sf.net/sfu/neotech_d2d_may _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
