I don't know if this is the issue but unless you have a very old humidity board then you should be getting the readings from the HIH4000 directory. The HIH3600 and HIH4000 sensors use slightly different formula for calculating the humidity.
Eric On Jul 25, 2013, at 10:32 AM, Rick Bolen(gm) <[email protected]> wrote: > hello, > > I recently compiled the latest source and am running owserver. My perl > script using OWNet.pm returns readings greater than 100 for humidity. > > I read\print the following: > > $owserver->read('/uncached/1F.AE4E02000000/main/26.901F74000000/HIH3600/humidity') > > I read that, at some point, humidity became a calculated value > (depending on the sensor model) but it appears I'm getting the raw value? > > The reading I get is the same as the raw value returned in Tree();. > > Do I need to calc the value or is there some other function call I need > to use? > > Thanks, > > Rick > > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk > _______________________________________________ > Owfs-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
