Hello Joris,
yes, I is running with command line paras like yours.
But I am struggling with the config file.
Regards
Jama
Am 02.01.14 01:52, schrieb Joris Meijerink:
> Hi,
>
> Got a system with a DS2482-800 and a DS2482-100
> (http://www.pridopia.co.uk/pi-2482-800.html) running.
>
> I've used the following how-to for my installation of OWFS:
> http://wiki.temperatur.nu/index.php/OWFS_with_i2c_support_on_Raspberry_Pi_%28English_version%29
>
> Got it running with:
> sudo /opt/owfs/bin/owfs --i2c=ALL:ALL --allow_other /mnt/1wire/
> and
> sudo /opt/owfs/bin/owhttpd --i2c=ALL:ALL -p 2121
>
> maybe of use to you,
>
> kind regards,
> Joris Meijerink
>
>> Hello
>> First I want to wish everyone a happy new Year!
>>
>> I am using 2xDS2482-800 and 1xDS2482-100 on my I2C bus of my raspberry.
>> The I2C addresses are 18,19,1A
>>
>> With the command " "sudo ./owhttpd -p 2121 --i2c=/dev/i2c-1:0
>> --i2c=/dev/i2c-1:1 --i2c=/dev/i2c-1:2" all devices and slaves will be
>> found correctly.
>>
>> However how can I configure the owfs.conf in the same way?
>> If I use the parameter " device = /dev/i2c-1" only one controller
>> (with the address 18) will be found.
>> The parameter " device = /dev/i2c-1:0" is not working, I get the
>> error " No valid 1-wire buses found"
>>
>> I found only one hint:
>> "The /dev/i2c-<n>:<i> syntax denotes offset <n> from I2C address
>> 0011000b on I2C bus of <i>. The mentioned command line syntax thus
>> tells owhttpd to look for 1-Wire controllers at addresses 0011000b,
>> 0011001b and 0011010b on the I2C bus of BSC1"
>>
>> However how can I access all three controller via the owfs.conf file?
>>
>> Thank you very much for your valuable help.
>>
>> Regards
>> Jama
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Rapidly troubleshoot problems before they affect your business. Most IT
>> organizations don't have a clear picture of how application performance
>> affects their revenue. With AppDynamics, you get 100% visibility into your
>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
>> Pro!
>> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
>>
>>
>> _______________________________________________
>> Owfs-developers mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
>
> ------------------------------------------------------------------------------
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
>
>
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
