if it's not to control a process, i think could use without problems, like paul told, temperature don't change too fast, only if you are controlling something, in this case should check system update rate using modbus devices i got ~20ms to read 8 termocouples with rs485 (serial) 9600bauds i think it's a good number to think about, 60~50Hz update rate is very good to control systems using temperature termocouples
2014-10-01 19:01 GMT-03:00 Paul Alfille <paul.alfi...@gmail.com>: > I've done over 100 DS18S20's (passive) on passive, active, Link and DS9490 > successfully. It isn't fast, but then your temperature changes aren't that > fast. > > On Wed, Oct 1, 2014 at 4:53 PM, Roberto Spadim <robe...@spadim.com.br> > wrote: >> >> that what i stored here some years ago when testing ds1820 devices >> in other words 300*.01 = 3 seconds >> maybe less maybe more >> >> what update period you need? >> >> >> ------------------------------------------------------------------------------ >> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer >> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports >> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper >> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer >> >> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk >> _______________________________________________ >> Owfs-developers mailing list >> Owfs-developers@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/owfs-developers > > > > ------------------------------------------------------------------------------ > Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer > Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports > Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper > Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer > http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > -- Roberto Spadim SPAEmpresarial Eng. Automação e Controle ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
