On 07.10.2014 03:46, Eloy Paris wrote: > Hi Michael, > > On Tue, Oct 07, 2014 at 12:35:44AM +0200, Michael Markstaller wrote: > >> P.S.: I have a bunch of Arduinos but even more, AVRs and coded a slave >> and an low-level 1w-analyzer for/with avr.. > > Is your 1-Wire slave code publicly available somewhere? I wrote my own > implementation (also for ATMega), which I have been using with no issues > for about two years, but I'm always curious to see how others have > tackled the same problem.
No, as - though it works fine IMHO on an attiny44 parasitic with <200uA - it never went to production and therefore I wanted to avoid useless questions and/or potential patent-issues without any benefit.. The first approaches were http://www.tm3d.de/index.php/1-wire-device-mit-avr , quite good, but after a few days I decided to start from scratch as I wanted a parasitic-supply with minimum power (aka: maximum power-saving) and a rock-solid powerdown-procedure saving into eeprom.. So, if you want to share code (which I really appreciate, don't want to hide anything, I'm an OSS addictive!), maybe first better off-list? Michael ------------------------------------------------------------------------------ Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
