I've made a board for this purpose with some other features. http://www.cupidcontrols.com/2015/02/cupid-v2-rf-hat-pi-b-pi-2-moteino-in-action/
Pinout for DS2483 as shown: http://www.cupidcontrols.com/wp-content/uploads/2015/10/DS2483pinout.png It's my goto on the Pi. Make sure to i2c-dev in your modules. Colin On 10/9/2015 11:02 PM, Markus Gaugusch wrote: > Hi, > > Just to be on the safe side: I'm currently making a DS2483 board for my > raspi. Is it correct to connect SLPZ with 2k2 to 3.3V and Vcc to 5V? > SDA/SCL go directly to the SDA/SCL pins on the Pi, right? > > Thank you :-) > Markus > > ------------------------------------------------------------------------------ > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
