Hi! I have a self soldered circuit board containing a DS2480 and a Max232-converter, back in the old days it was connected directly to the serialport of a computer but nowdays I'm using a USB-serial converter connected to a Raspberry Pi. Thinking about it it makes no sense converting the signal to a RS232-level and back again, it only makes the installation more complex and more troublesome to faultfinding. Should'nt it be possible to connect the DS2480 directly to one/two pins on the Raspberry and use a suitable driver? Could anyone point me to which driver to use, how should owfs.conf be setup to support this, and which pins on the Raspberry Pi should I connnect to?
Many thanks! // Henrik ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports.http://sdm.link/zohodev2dev _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
