The one thing I see missing is if you run it on a PIE and send it to another
device over wifi then you eliminate any chance of thunder crashing a whole
system and I mean everything in your home! Of course I live on the beach and
we do have lot of storms! I just remember when I had a bolt land 200ft from
the home and it still nocked everything and started from scratch again. since
that time I do not have outdoor sensors! If power is a issue panels and a
small battery is cheap and helps isolates one system from everything else! Why
would you not want to isolate this system from other problems.... Seems the
Pie is the cheapest way to do that! Why reinvent the wheel when that works and
it is cheap.
On Tuesday, August 1, 2017 3:25 PM,
"owfs-developers-requ...@lists.sourceforge.net"
<owfs-developers-requ...@lists.sourceforge.net> wrote:
Send Owfs-developers mailing list submissions to
owfs-developers@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/owfs-developers
or, via email, send a message with subject or body 'help' to
owfs-developers-requ...@lists.sourceforge.net
You can reach the person managing the list at
owfs-developers-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Owfs-developers digest..."
Today's Topics:
1. Re: Arduino yun as wifi 1wire master (Dr. Trigon)
2. 1wire slaves (on Arduino) (Dr. Trigon)
3. Re: Arduino yun as wifi 1wire master (Jan Kandziora)
----------------------------------------------------------------------
Message: 1
Date: Tue, 01 Aug 2017 20:09:02 +0200
From: "Dr. Trigon" <dr.tri...@surfeu.ch>
To: owfs-developers@lists.sourceforge.net
Subject: Re: [Owfs-developers] Arduino yun as wifi 1wire master
Message-ID: <73e47d96-d07c-488a-9448-24c22ae4e...@surfeu.ch>
Content-Type: text/plain; charset="utf-8"
Hello all!
Thanks for the numerous replies and suggestions to this topic! To make a long
story short; I decided to not insist in a free/open solution for now and
ordered a ethernet2wifi converter as I have an unused ethernet master around.
For later I consider using a Raspi Zero W + level-shifting transistor + pull-up
as this is an intressting option. Or may be an commercial master (USB, I2C,
etc.) on the raspi.
For power, a solar panel was the solution I considered and still do. DC/DC
converters are amazingly efficient nowadays... ;)
Drilling any hole - also in the proximity of the roof is not an option, as I
currently live in an apartment block. Otherwise this can be a very nice
solution. Actually I would prefer it, but then go outside with ethernet for a
1wire master as the 1wire could become verrry long otherwise (even though it
might work).
owserver-deamon that would be needed to run on the Raspi Zero W e.g., means
running 'owserver' binary, right?
The reason why I wanted to avoid running another instance of owserver in the
first place, was power consumption and the fact that importing owfs instances
from other machines might be a bit problematic (or connecting to other
instances using the -s option). I read a few comments about this, don't know.
Regarding power, I assumed the processors consumption (avr vs. arm, yun vs.
raspi) and the number of processes running does matter, but if wifi dominates
that might be wrong here. (And thus even an uno with wifi shield consumes the
same.)
Thanks for all your comments and greetings
Am 23. Juli 2017 14:06:39 MESZ schrieb owfs-developers-request
<owfs-developers-requ...@lists.sourceforge.net>:
>
>Send Owfs-developers mailing list submissions to
> owfs-developers@lists.sourceforge.net
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>or, via email, send a message with subject or body 'help' to
> owfs-developers-requ...@lists.sourceforge.net
>
>You can reach the person managing the list at
> owfs-developers-ow...@lists.sourceforge.net
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Owfs-developers digest..."
>
>
>Today's Topics:
>
> 1. Re: Arduino yun as wifi 1wire master (Jan Kandziora)
> 2. Re: Arduino yun as wifi 1wire master (Stefano Miccoli)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sat, 22 Jul 2017 15:12:21 +0200
>From: Jan Kandziora <j...@gmx.de>
>To: owfs-developers@lists.sourceforge.net
>Subject: Re: [Owfs-developers] Arduino yun as wifi 1wire master
>Message-ID: <502209ec-a3ef-5c46-2b19-1e3750800...@gmx.de>
>Content-Type: text/plain; charset=utf-8
>
>Am 22.07.2017 um 12:24 schrieb Dr. Trigon:
>>
>> Raspi Zero is fine too, but someone needs
>> to tell me how to set the software up, how to build the stuff
>> together.
>>
>1. You buy a Raspberry Pi Zero W.
>2. You put an Raspian image (minimal will do) from the Raspberry Pi
>website onto an >2GB micro SD card and put it into the Pi.
>3. You switch on the thing, connect a HDMI screen and keyboard to it,
>then login into this little Linux box in front of you.
>4. You configure Wifi and Internet connection to get the thing
>connected
>to your indoors equipment and load software form the internet.
>5. You apt-get the owserver package and edit the raspi's
>/boot/config.txt to include the w1-gpio overlay on GPIO4. Reboot.
>6. You now have a 3.3V onewire on GPIO4, available through Wifi, TCP
>port 4304. This is what owserver does.
>7. Your indoor devices can connect to that owserver on the Raspberry
>via
>-s <raspi-ip>:4304 command line option.
>8. Congrats. You are done.
>
>
>> I don't want to run another instance of owfs on those
>> devices as they should act as master and not owfs servers.
>>
>I don't know what weird idea you have about how owserver works but it's
>designed explicitely for the thing you want to do. I use it that way in
>my setups.
>
>It is "bullshit" (to use your words) to avoid owserver just because you
>? yeah, what ? don't know it better?
>
>
>> Basically
>> I could write a sketch for Arduino that emulates linkhube master and
>> then should be able to connect this to owserver but that would be
>> quite some effort given FHEM has already a solution for this... The
>> power btw. is no concern, if needed I can use a car battery... ;))
>>
>This means reinventing the wheel. Have fun.
>
>Kind regards
>
> Jan
>
>
>
>------------------------------
>
>Message: 2
>Date: Sun, 23 Jul 2017 02:01:35 +0200
>From: Stefano Miccoli <mo...@icloud.com>
>To: "OWFS (One-wire file system) discussion and help"
> <owfs-developers@lists.sourceforge.net>
>Subject: Re: [Owfs-developers] Arduino yun as wifi 1wire master
>Message-ID: <d2c2b054-7c1d-4482-8f59-336edcb2b...@icloud.com>
>Content-Type: text/plain; charset="utf-8"
>
>
>> On 22 Jul 2017, at 12:24, Dr. Trigon <dr.tri...@surfeu.ch> wrote:
>>
>> I don't want to run another instance of owfs on those devices as they
>should act as master and not owfs servers.
>
>
>What you need is an IP protocol that allows you to access a remote
>1-wire network: owserver (the protocol) was designed exactly to address
>this problem, see http://owfs.org/index.php?page=owserver-protocol
>
>Documentation and terminology are ? a little hard to understand, so let
>my try to explain it here.
>
>First one should understand that ?owserver? has many meanings:
>
>- owserver-protocol: the TCP messaging protocol used by OWFS components
>to communicate over IP
>- owserver-server: an agent that plays the server role in an
>owserver-protocol message exchange
>- owserver-client: an agent that plays the client side in the
>owserver-protocol
>- owserver-daemon: the program, which is the main OWFS owserver-server,
>but that can act also as an owserver-client.
>
>The OWFS way to solve your problem is that on each remote 1-wire
>network you should have an owserver-daemon running (Please note: only
>the owserver-daemon, not the full stack of owhttp, owftp, owfs, etc.)
>Each owserver-daemon controls one or more 1-wire masters, and acts as
>an owserver-server, over a common IP network, say a WiFi LAN.
>Owserver-clients can query over IP the various owserver-daemons (acting
>as owserver-servers) about the remote 1-wire networks they are
>controlling.
>
>To make things a little bit more complicated, you should know that an
>owserver-daemon can be configured to be an owserver-client of a remote
>owserver-server: this means that the owserver-daemon is now able to
>present the remote 1-wire devices as local ones? Please see
>http://owfs.org/index.php?page=loop-suppression for different
>owserver-server network topologies examples and the built-in loop
>suppression mechanism.
>
>This is what OWFS has to offer: if you keep it simple (owserver-daemons
>acting only as owserver-servers) it is quite simple to configure and
>manage. Of course owserver-clients should know which owserver-server
>query. However if you prefer, you can merge all remote 1-wire networks
>into a single ?virtual? 1-wire network, by using the owserver-daemon
>client capabilities, so that your to your clients all 1-wire devices
>are presented as if they were on a single 1-wire network.
>
>Of course you can invent your own 1-wire-over-IP protocol and implement
>it in the micro-controller of your choice, or even emulate the LINK
>protocol. But it is much, much more complicated that having multiple
>owserver-daemons running on your network.
>
>Hope my explanation was at least understandable.
>
>Bye
>
>Stefano
>
>---
>
>BTW the Y?n is a 65? device in which you have two parallel environments
>talking to each other: Arduino and Linux (Linino OS, based on OpenWRT).
>Linux specs are really minimal: 64MB DDR2 RAM, 400MHz clock speed.
>
>On the contrary the Pi Zero W is a 10? device, which runs a
>full-fledged Linux (or windows 10, if you prefer) with 1GB Ram, running
>at 1GHz.
>
>Spending 55? just for having an Arduino bit-banging the 1-wire protocol
>makes no sense to me.
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>
>------------------------------
>
>------------------------------------------------------------------------------
>Check out the vibrant tech community on one of the world's most
>engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>------------------------------
>
>Subject: Digest Footer
>
>_______________________________________________
>Owfs-developers mailing list
>Owfs-developers@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
>------------------------------
>
>End of Owfs-developers Digest, Vol 133, Issue 9
>***********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Tue, 01 Aug 2017 20:43:40 +0200
From: "Dr. Trigon" <dr.tri...@surfeu.ch>
To: owfs-developers@lists.sourceforge.net
Subject: [Owfs-developers] 1wire slaves (on Arduino)
Message-ID: <e99743de-f961-412a-8efe-3b10e158a...@surfeu.ch>
Content-Type: text/plain; charset="utf-8"
Hello all
Its about 1 year since I played with Arduino 1wire slaves last. I have the
impression a lot has happened on that field since (moat, etc.). Where should I
start?
I would tend to go for moat onewirehub (instead of owslave), does that make
sense? Is it supported by owfs as moat device or as the emulated devices are
anyways? Can I implement more than 1 chip per Arduino, is that correct?
Any hints and experience shared would be helpful. Thanks and greetings!
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Tue, 1 Aug 2017 21:25:27 +0200
From: Jan Kandziora <j...@gmx.de>
To: "OWFS (One-wire file system) discussion and help"
<owfs-developers@lists.sourceforge.net>
Subject: Re: [Owfs-developers] Arduino yun as wifi 1wire master
Message-ID: <7739d9e5-7856-0dc5-ed7f-65bff07cf...@gmx.de>
Content-Type: text/plain; charset=utf-8
Am 01.08.2017 um 20:09 schrieb Dr. Trigon:
>
> owserver-deamon that would be needed to run on the Raspi Zero W e.g.,
> means running 'owserver' binary, right?
>
Yes,sure.
> The reason why I wanted to avoid running another instance of owserver
> in the first place, was power consumption
>
Wifi is going to eat your battery. The CPU does mostly nothing and will
eat <1/10 of Wifi.
Also, if you want to save energy, you should use one of the "commercial"
Onewire host adapters, e.g. the DS2483. Bitbanging wakes up the CPU on
every bit sent and this will eat a lot of energy. (But still *nothing*
compared to Wifi.)
> and the fact that importing
> owfs instances from other machines might be a bit problematic (or
> connecting to other instances using the -s option). I read a few
> comments about this, don't know.
>
These most likely came from people who have problems setting their stuff
up correctly and mixing up things.
> Regarding power, I assumed the
> processors consumption (avr vs. arm, yun vs. raspi) and the number of
> processes running does matter, but if wifi dominates that might be
> wrong here. (And thus even an uno with wifi shield consumes the
> same.)
>
With only one core, there is only one process running. All the other
processes are waiting in the scheduler queue. What effects energy
consumption of the CPU in a non-number-crunching application is the
number of interrupts to service. That is because each interrupt means
waking up the CPU from sleep. All other effects are neglible.
You don't have to count processes, you have to count interrupts. Wifi
produces a lot. Timer produces an awful lot when the CPU has to bitbang
things.
Kind regards
Jan
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------
End of Owfs-developers Digest, Vol 134, Issue 2
***********************************************
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
