Am 05.05.20 um 21:17 schrieb Dennis Putnam:
> *Hi Jan,** ** **Here is the requested info:*
>
> *systemctl show owserver.service|grep ExecStart*
>
> ExecStart={ path=/usr/bin/owserver ; argv[]=/usr/bin/owserver -c
> /etc/owfs.conf ; ignore_errors=no ; start_time=[Mon 2020-05-04
> 17:17:17 EDT] ; stop_time=[Mon 2020-05-04 17:17:17 EDT] ; pid=485 ;
> code=exited ; status=0 }
>
That means owserver reads /etc/owfs.conf for its configuration
options. As I wrote, we also need to see the contents of that file.
> *I'm not sure how to tell what adapter I'm using (not a hardware
> guy) but I think I was told it is DS2480 as the busmaster and the
> device is DS2413.*
>
You must find out for sure which busmaster you use, and if it is
indeed a DS2480, at which RS232 port it is connected. The Raspi's
internal one? Or one on an USB-RS232 adapter?
> *cat /boot/config.txt*
>>
> # Uncomment some or all of these to enable the optional hardware
> interfaces dtparam=i2c_arm=on
>
I²C is enabled which may mean the host might use an DS2482
hostadapter. W1 on GPIO is not enabled so it can't be that hostadapter.
Kind regards
Jan
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
