Hi, I got some rpms for RHEL5 from the build service. There is no problem with them, but for gui rpm. It seems that pacemaker-pygui cannot be erased using rpm command.
# rpm -e pacemaker-pygui-1.2-1.2 /sbin/ldconfig: relative path `0' used to build cache error: %postun(pacemaker-pygui-1.2-1.2.x86_64) scriptlet failed, exit status 1 it's the same issue with this; http://hg.beekhof.net/pacemaker/dev/rev/6be96ba752a0 rpm for suse didn't display such a error, and could be erased succesfully. it might be a specific symptom for redhat, so I'd appreciate it if you fix it when you have time. pacemaker-pygui is almost the same with heartbeat-gui for now, Is it going to change its look and feel, or way to setting? Thanks, Junko > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Beekhof > Sent: Friday, January 25, 2008 5:19 PM > To: The Pacemaker cluster resource manager > Cc: Linux-HA User > Subject: [Pacemaker] Heartbeat/Pacemaker packages now available for > Debianx86_64, RHEL-5 and CentOS-5 > > There have been people asking for these in the past so I thought it > worth mentioning that, as of yesterday, support for RHEL and CentOS > has been added to the build service. > We also recently got support for Debian Etch and Ubuntu 7.10 on x86_64. > > The current list of supported targets for pre-compiled Heartbeat and > Pacemaker packages is listed below. > You can read the full press release at: > > http://www.novell.com/news/press/the-opensuse-build-service-expands-suppor > t-to-red-hat-and-centos/ > > regards, > Andrew > > * Built for i586 and x86_64 > + SLES 9 > + SLES 10 > + SUSE Linux 10.0 > + SUSE Linux 10.1 > + openSUSE 10.2 > + openSUSE 10.3 > > + RHEL 5 > + CentOS 5 > > + Fedora 6 > + Fedora 7 > + Fedora 8 > > + Debian Etch > + Ubuntu 7.10 > > > * Built for i586 only > + Ubuntu 7.04 > + Mandriva 2006 > + Mandriva 2007 > > > > _______________________________________________ > Pacemaker mailing list > Pacemaker@clusterlabs.org > http://list.clusterlabs.org/mailman/listinfo/pacemaker
[EMAIL PROTECTED] buildservice]warning: pacemaker-heartbeat-0.6.0-20.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d362aeb Preparing... ########################################### [100%] 1:pacemaker-heartbeat ########################################### [100%] # rpm -ihv pacemaker-heartbeat-devel-0.6.0-20.1.x86_64.rpm warning: pacemaker-heartbeat-devel-0.6.0-20.1.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d362aeb Preparing... ########################################### [100%] 1:pacemaker-heartbeat-dev########################################### [100%] # rpm -ihv pacemaker-pygui-1.2-1.2.x86_64.rpm warning: pacemaker-pygui-1.2-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1d362aeb Preparing... ########################################### [100%] 1:pacemaker-pygui ########################################### [100%] # rpm -qa | grep pacemaker pacemaker-heartbeat-0.6.0-20.1 pacemaker-heartbeat-devel-0.6.0-20.1 pacemaker-pygui-1.2-1.2 # rpm -e pacemaker-pygui-1.2-1.2 /sbin/ldconfig: relative path `0' used to build cache error: %postun(pacemaker-pygui-1.2-1.2.x86_64) scriptlet failed, exit status 1
spec.patch
Description: Binary data
_______________________________________________ Pacemaker mailing list Pacemaker@clusterlabs.org http://list.clusterlabs.org/mailman/listinfo/pacemaker
