Sorry,
There were some wrong explanations.

> (4) Now, the failconts for dummy:1 are;
>       dl380g5c = 1
>       dl380g5d = 1

(4) Now, the failconts for dummy:1 are;
        dl380g5b = 1
        dl380g5c = 1


> After set value "0",
> The failcount was deleted not only for dl380g5c but also dl380g5d.

After set value "0",
The failcount was deleted not only for dl380g5c but also dl380g5b.


Thanks,
Junko

> -----Original Message-----
> From: Junko IKEDA [mailto:ike...@intellilink.co.jp]
> Sent: Thursday, May 21, 2009 6:33 PM
> To: pacema...@clusterlabs.org
> Subject: [Pacemaker] can not handle the failcount for clone resource
usingcrm
> tool
> 
> Hi,
> 
> I have 4 nodes (dl380g5a, dl380g5b, dl380g5c, dl380g5d),
> and run 1 clone resource with the following configuration.
>       clone_max"="2"
>       clone_node_max"="1"
> 
> (1) Initial state
>       dummy:0 dl380g5a
>       dummy:1 dl380g5b
> 
> (2) dummy:1 break down, and move to dl380g5c
>       dummy:0 dl380g5a
>       dummy:1 dl380g5c
> 
> (3) dummy:1 break down again, move to dl380g5d
>       dummy:0 dl380g5a
>       dummy:1 dl380g5d
> 
> (4) Now, the failconts for dummy:1 are;
>       dl380g5c = 1
>       dl380g5d = 1
> 
> I tried to delete the failcount using crm.
> But it seems that delete switch for clone resource doesn't work.
> 
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=1
> crm(live)resource# failcount dummy:1 delete dl380g5c
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=1
> 
> set value "0" worked.
> crm(live)resource# failcount dummy:1 set dl380g5c 0
> crm(live)resource# failcount dummy:1 show dl380g5c
> scope=status  name=fail-count-dummy:1 value=0
> 
> Is this case only in the clone resrouce?
> 
> And anothre thing.
> After set value "0",
> The failcount was deleted not only for dl380g5c but also dl380g5d.
> I expected that "failcount <rsc> show _<node>_" could specify one node.
> Is there any wrong configurations?
> 
> See also attatched hb_report.
> 
> Best Regards,
> Junko Ikeda
> 
> NTT DATA INTELLILINK CORPORATION

(1) initial state
        dummy:0 dl380g5a
        dummy:1 dl380g5b

============
Last updated: Thu May 21 17:45:16 2009
Current DC: dl380g5d (1a7cfd3b-c885-45a3-b893-b09adb286e5c) - partition with 
quorum
Version: 1.0.3-2e35b8ac90a327c77ff869e1189fc70234213906
4 Nodes configured, unknown expected votes
1 Resources configured.
============

Online: [ dl380g5a dl380g5b dl380g5c dl380g5d ]

Clone Set: clone
        Started: [ dl380g5a dl380g5b ]

Operations:
* Node dl380g5a:
   dummy:0: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5d:
* Node dl380g5b:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5c:


(2) dummy:1 break down, and dummy:1 move to dl380g5c
        dummy:0 dl380g5a
        dummy:1 dl380g5c

============
Last updated: Thu May 21 17:46:21 2009
Current DC: dl380g5d (1a7cfd3b-c885-45a3-b893-b09adb286e5c) - partition with 
quorum
Version: 1.0.3-2e35b8ac90a327c77ff869e1189fc70234213906
4 Nodes configured, unknown expected votes
1 Resources configured.
============

Online: [ dl380g5a dl380g5b dl380g5c dl380g5d ]

Clone Set: clone
        Started: [ dl380g5a dl380g5c ]

Operations:
* Node dl380g5a:
   dummy:0: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5d:
* Node dl380g5b:
   dummy:1: migration-threshold=1 fail-count=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=7 (not running)
    + (5) stop: rc=0 (ok)
* Node dl380g5c:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)

Failed actions:
    dummy:1_monitor_10000 (node=dl380g5b, call=4, rc=7, status=complete): not 
running


(3) dummy:1 break down again, and dummy:1 move to dl380g5d
        dummy:0 dl380g5a
        dummy:1 dl380g5d

============
Last updated: Thu May 21 17:46:51 2009
Current DC: dl380g5d (1a7cfd3b-c885-45a3-b893-b09adb286e5c) - partition with 
quorum
Version: 1.0.3-2e35b8ac90a327c77ff869e1189fc70234213906
4 Nodes configured, unknown expected votes
1 Resources configured.
============

Online: [ dl380g5a dl380g5b dl380g5c dl380g5d ]

Clone Set: clone
        Started: [ dl380g5a dl380g5d ]

Operations:
* Node dl380g5a:
   dummy:0: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5d:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5b:
   dummy:1: migration-threshold=1 fail-count=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=7 (not running)
    + (5) stop: rc=0 (ok)
* Node dl380g5c:
   dummy:1: migration-threshold=1 fail-count=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=7 (not running)
    + (5) stop: rc=0 (ok)

Failed actions:
    dummy:1_monitor_10000 (node=dl380g5b, call=4, rc=7, status=complete): not 
running
    dummy:1_monitor_10000 (node=dl380g5c, call=4, rc=7, status=complete): not 
running


(4) Now, the failconts for dummy:1 are;
        dl380g5b = 1
        dl380g5c = 1

============
Last updated: Thu May 21 17:48:06 2009
Current DC: dl380g5d (1a7cfd3b-c885-45a3-b893-b09adb286e5c) - partition with 
quorum
Version: 1.0.3-2e35b8ac90a327c77ff869e1189fc70234213906
4 Nodes configured, unknown expected votes
1 Resources configured.
============

Online: [ dl380g5a dl380g5b dl380g5c dl380g5d ]

Clone Set: clone
        Started: [ dl380g5a dl380g5d ]

Operations:
* Node dl380g5a:
   dummy:0: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5d:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=0 (ok)
* Node dl380g5b:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=7 (not running)
    + (5) stop: rc=0 (ok)
* Node dl380g5c:
   dummy:1: migration-threshold=1
    + (3) start: rc=0 (ok)
    + (4) monitor: interval=10000ms rc=7 (not running)
    + (5) stop: rc=0 (ok)

Failed actions:
    dummy:1_monitor_10000 (node=dl380g5b, call=4, rc=7, status=complete): not 
running
    dummy:1_monitor_10000 (node=dl380g5c, call=4, rc=7, status=complete): not 
running
_______________________________________________
Pacemaker mailing list
Pacemaker@oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Reply via email to