On 10/15/2009 03:33 PM, Johan Verrept wrote: >> [...] >>> 14:37:46 heartbeat [3011]: ERROR: glib: cannot lock line /dev/ttyS0 >>> 14:37:46 heartbeat [3011]: ERROR: make_io_childpair: cannot open >>> serial /dev/ttyS0 >> >> Do you use serial? If so, can you fix it? > > That's the problem. If I remove the (currently disconnected) serial line > from the config, it boots fine. I assumed it would ignore these. > Any idea why hb 3.0.0 would fail to lock while hb 2.99.2 succeeds? I > would like to be able to use the serial line. > > Do you know where to go look for the lock files? I tried /var/lock but I > see nothing. (I also tried /ub/var/lock since we use the /ub prefix > during building). There is also no mention *why* it cannot lock the > line.
sorry, i'm no serial line guy ;) the few cases where i used it, it worked... is another program using ttyS0? (e.g. getty? ser2net? etc.) (lsof -n |grep /dev/ttyS0) is it possible to *directly* communicate via the serial line? what happens if you connect the serial cable before starting pacemaker? cheers, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OEG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________ Pacemaker mailing list [email protected] http://oss.clusterlabs.org/mailman/listinfo/pacemaker
