Hi, I have two network cards and configured corosync-1.2.7 with rrp_mode: active
at first corosync-cfg -s tells me
Printing ring status.
Local node ID 1210452490
RING ID 0
id = 10.10.38.72
status = ring 0 active with no faults
RING ID 1
id = 10.10.40.115
status = ring 1 active with no faults
after a very short time I see the following:
RING ID 1
id = 10.10.40.115
status = Incrementing problem counter for seqid 1352 iface
10.10.40.115 to [3 of 10]
and finally:
RING ID 1
id = 10.10.40.115
status = Marking seqid 1390 ringid 1 interface 10.10.40.115 FAULTY -
adminisrtative intervention required.
Anybody being successful at all using rrp_mode with corosync?
Greetings.
--
Dr. Michael Schwartzkopff
Guardinistr. 63
81375 München
Tel: (0163) 172 50 98
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ Pacemaker mailing list: Pacemaker@oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
