Hi Paul!
Am Dienstag, 1. Februar 2011 10:35 schrieb paul harford: > Hi NIkita > Many thanks for your assistance, i updated the changes you noticed but now > my 2 nodes just keep rebooting, did i enter something incorrectly in the > pingd directive ? > > Paul > > > i can see these errors in the messages log and my configuration is below > > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: clone_print: Clone Set: > connected > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: short_print: > Stopped: [ pingd:0 pingd:1 ] - IMHO clone ping resource is not necesary - think about it! > Feb 1 09:01:06 crhnode2 pengine: [4103]: info: rsc_merge_weights: > failoverip: Rolling back scores from crhweb > Feb 1 09:01:06 crhnode2 pengine: [4103]: info: native_color: Resource > crhweb cannot run anywhere -- that is bad. of course, because: > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: RecurringOp: Start > recurring monitor (10s) for pingd:0 on crhnode2 > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Operation > pingd-monitor-5s-0 is a duplicate of pingd-monitor-5s > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Do not use the > same (name, interval) combination more than once per resource - here it says very clear: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Operation > pingd-monitor-5s-0 is a duplicate of pingd-monitor-5s > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Do not use the > same (name, interval) combination more than once per resource > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: RecurringOp: Start > recurring monitor (10s) for pingd:1 on crhnode1 > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Operation > pingd-monitor-5s-0 is a duplicate of pingd-monitor-5s > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Do not use the > same (name, interval) combination more than once per resource > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Operation > pingd-monitor-5s-0 is a duplicate of pingd-monitor-5s > Feb 1 09:01:06 crhnode2 pengine: [4103]: ERROR: is_op_dup: Do not use the > same (name, interval) combination more than once per resource > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: LogActions: Leave > resource failoverip (Started crhnode1) > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: LogActions: Stop resource > crhweb (crhnode1) > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: LogActions: Start > pingd:0 (crhnode2) > Feb 1 09:01:06 crhnode2 pengine: [4103]: notice: LogActions: Start > pingd:1 (crhnode1) > Feb 1 09:01:06 crhnode2 crmd: [3742]: info: do_state_transition: State > transition S_POLICY_ENGINE -> S_TRANSITION_ENGINE [ input=I_PE_SUCCESS > cause=C_IPC_MESSAGE origin=handle_response ] > Feb 1 09:01:06 crhnode2 pengine: [4103]: info: process_pe_message: > Transition 59: PEngine Input stored in: /var/lib/pengine/pe-input-82.bz2 > Feb 1 09:01:06 crhnode2 crmd: [3742]: info: unpack_graph: Unpacked > transition 59: 14 actions in 14 synapses > Feb 1 09:01:06 crhnode2 pengine: [4103]: info: process_pe_message: > Configuration ERRORs found during PE processing. Please run "crm_verify > -L" to identify issues. - and here again: it says very clear .... - pls read carefully BEFORE you start sth! > > > > here is my current configuration > > node $id="271808bb-ed74-4eaa-8c94-bf32a00074dd" crhnode1 \ > attributes standby="off" > node $id="59440607-2a5c-450e-84fa-94bf69742671" crhnode2 \ > attributes standby="off" > primitive crhweb ocf:heartbeat:apache \ > params configfile="/etc/httpd/conf/httpd.conf" \ > op monitor interval="60s" \ > meta target-role="Started" > primitive failoverip ocf:heartbeat:IPaddr \ > params ip="10.100.1.100" cidr_netmask="255.255.0.0" \ > op monitor interval="30s" \ > meta target-role="Started" > primitive pingd ocf:pacemaker:pingd \ > params dampen="5s" host_list="10.100.0.254" multiplier="1000" > name="pingval" \ > operations $id="pingd-operations" \ > op monitor interval="10s" timeout="20s" \ > op monitor interval="90s" timeout="25s" start \ > op monitor interval="100s" timeout="25s" stop > clone connected pingd \ > meta globally-unique="false" target-role="started" > location cli-prefer-crhweb crhweb \ > rule $id="cli-prefer-rule-crhweb" inf: #uname eq crhnode1 > location crhweb_on_connected_node crhweb \ > rule $id="crhweb_on_connected_node-rule" -inf: not_defined pingval > or pingval lte 0 > location prefer-crhnode1 crhweb 50: crhnode1 > colocation crhweb-with-failoverip inf: crhweb failoverip > order crhweb-after-failoverip inf: pingd failoverip crhweb > property $id="cib-bootstrap-options" \ > dc-version="1.0.10-da7075976b5ff0bee71074385f8fd02f296ec8a3" \ > cluster-infrastructure="Heartbeat" \ > stonith-enabled="false" \ > no-quorum-policy="ignore" > > On 1 February 2011 07:21, Nikita Michalko <michalko.sys...@a-i-p.com> wrote: > > Hi Paul, > > > > see below! > > > > Am Montag, 31. Januar 2011 19:55 schrieb paul harford: > > > HI guys > > > i'm having some issues with a ping directive, my current config is > > > below and basically i want the web resource to failover to the second > > > node if > > > > the > > > > > ping can no longer contact the default gateway > > > > > > so here goes > > > > > > crm configure primitive ping ocf:pacemaker:ping params dampen=5s > > > host_list=(default GateWay) multplier=1000 name=pingval operations > > > $id=ping-operations op moinitor interval=10s timeout=15s > > > > - this is surely wrong: "moinitor" ? > > - no such primitive (ping) below ... > > > > HTH > > > > Nikita Michalko > > > > > and > > > > > > crm configure clone connected ping meta globally-unique=false > > > target-role=started > > > > > > and > > > > > > location web_on_connected_node cweb rule $id=web_on_connected_node-rule > > > -inf: not_defined pingval or pingval lte 0 > > > > > > > > > Does anyone see any isssues's whith the above confiuguration ? i want > > > to check first as the last time i tried it wouldn't work and my > > > resources would not failover or start > > > > > > > > > > > > > > > node $id="271808bb-ed74-4eaa-8c94-bf32a00074dd" crhnode1 \ > > > attributes standby="off" > > > node $id="59440607-2a5c-450e-84fa-94bf69742671" crhnode2 \ > > > attributes standby="off" > > > primitive cweb ocf:heartbeat:apache \ > > > params configfile="/etc/httpd/conf/httpd.conf" \ > > > op monitor interval="60s" \ > > > meta target-role="Started" > > > primitive failoverip ocf:heartbeat:IPaddr \ > > > params ip="10.100.1.100" cidr_netmask="255.255.0.0" \ > > > op monitor interval="30s" \ > > > meta target-role="Started" > > > location cli-prefer-cweb cweb \ > > > rule $id="cli-prefer-rule-crhweb" inf: #uname eq crhnode1 > > > location prefer-crhnode1 crhweb 50: crhnode1 > > > colocation cweb-with-failoverip inf: cweb failoverip > > > order crhweb-after-failoverip inf: failoverip cweb > > > property $id="cib-bootstrap-options" \ > > > dc-version="1.0.10-da7075976b5ff0bee71074385f8fd02f296ec8a3" \ > > > cluster-infrastructure="Heartbeat" \ > > > stonith-enabled="false" \ > > > no-quorum-policy="ignore" > > > rsc_defaults $id="rsc-options" \ > > > resource-stickiness="100" > > > > _______________________________________________ > > Pacemaker mailing list: Pacemaker@oss.clusterlabs.org > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker > > > > Project Home: http://www.clusterlabs.org > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf > > Bugs: > > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker Best regards Nikita Michalko _______________________________________________ Pacemaker mailing list: Pacemaker@oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
