Hi,
i use debian 7.
At first, i use the standard packages of debian, and pacemaker works perfect.
Now, i compiled my own packages, because i need pacemaker_remote. Since i use my compiled version, pacemaker see no nodes!
corosync2 lists both hosts:
root@pacemaker1:/var/lib/pacemaker/cib# corosync-cmapctl | grep members
runtime.totem.pg.mrp.srp.members.181614346.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.181614346.ip (str) = r(0) ip(10.211.55.10)
runtime.totem.pg.mrp.srp.members.181614346.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.181614346.status (str) = joined
runtime.totem.pg.mrp.srp.members.181614347.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.181614347.ip (str) = r(0) ip(10.211.55.11)
runtime.totem.pg.mrp.srp.members.181614347.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.181614347.status (str) = joined
runtime.totem.pg.mrp.srp.members.181614346.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.181614346.ip (str) = r(0) ip(10.211.55.10)
runtime.totem.pg.mrp.srp.members.181614346.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.181614346.status (str) = joined
runtime.totem.pg.mrp.srp.members.181614347.config_version (u64) = 0
runtime.totem.pg.mrp.srp.members.181614347.ip (str) = r(0) ip(10.211.55.11)
runtime.totem.pg.mrp.srp.members.181614347.join_count (u32) = 1
runtime.totem.pg.mrp.srp.members.181614347.status (str) = joined
root@pacemaker1:/var/lib/pacemaker/cib# crm_mon -1
Last updated: Fri Jan 16 16:49:10 2015
Last change: Fri Jan 16 16:05:15 2015
Current DC: NONE
0 Nodes configured
0 Resources configured
Last updated: Fri Jan 16 16:49:10 2015
Last change: Fri Jan 16 16:05:15 2015
Current DC: NONE
0 Nodes configured
0 Resources configured
uname -n returns pacemaker1 / pacemaker2.
Logfile is attached.
corosync.conf:
totem {
version: 2
version: 2
token: 5000
# crypto_cipher and crypto_hash: Used for mutual node authentication.
# If you choose to enable this, then do remember to create a shared
# secret with "corosync-keygen".
# enabling crypto_cipher, requires also enabling of crypto_hash.
crypto_cipher: none
crypto_hash: none
# If you choose to enable this, then do remember to create a shared
# secret with "corosync-keygen".
# enabling crypto_cipher, requires also enabling of crypto_hash.
crypto_cipher: none
crypto_hash: none
# interface: define at least one interface to communicate
# over. If you define more than one interface stanza, you must
# also set rrp_mode.
interface {
# Rings must be consecutively numbered, starting at 0.
ringnumber: 0
# This is normally the *network* address of the
# interface to bind to. This ensures that you can use
# identical instances of this configuration file
# across all your cluster nodes, without having to
# modify this option.
bindnetaddr: 10.211.55.10
# However, if you have multiple physical network
# interfaces configured for the same subnet, then the
# network address alone is not sufficient to identify
# the interface Corosync should bind to. In that case,
# configure the *host* address of the interface
# instead:
# bindnetaddr: 192.168.1.1
# When selecting a multicast address, consider RFC
# 2365 (which, among other things, specifies that
# 239.255.x.x addresses are left to the discretion of
# the network administrator). Do not reuse multicast
# addresses across multiple Corosync clusters sharing
# the same network.
mcastaddr: 239.255.1.1
# Corosync uses the port you specify here for UDP
# messaging, and also the immediately preceding
# port. Thus if you set this to 5405, Corosync sends
# messages over UDP ports 5405 and 5404.
mcastport: 5405
# Time-to-live for cluster communication packets. The
# number of hops (routers) that this ring will allow
# itself to pass. Note that multicast routing must be
# specifically enabled on most network routers.
ttl: 1
}
}
# over. If you define more than one interface stanza, you must
# also set rrp_mode.
interface {
# Rings must be consecutively numbered, starting at 0.
ringnumber: 0
# This is normally the *network* address of the
# interface to bind to. This ensures that you can use
# identical instances of this configuration file
# across all your cluster nodes, without having to
# modify this option.
bindnetaddr: 10.211.55.10
# However, if you have multiple physical network
# interfaces configured for the same subnet, then the
# network address alone is not sufficient to identify
# the interface Corosync should bind to. In that case,
# configure the *host* address of the interface
# instead:
# bindnetaddr: 192.168.1.1
# When selecting a multicast address, consider RFC
# 2365 (which, among other things, specifies that
# 239.255.x.x addresses are left to the discretion of
# the network administrator). Do not reuse multicast
# addresses across multiple Corosync clusters sharing
# the same network.
mcastaddr: 239.255.1.1
# Corosync uses the port you specify here for UDP
# messaging, and also the immediately preceding
# port. Thus if you set this to 5405, Corosync sends
# messages over UDP ports 5405 and 5404.
mcastport: 5405
# Time-to-live for cluster communication packets. The
# number of hops (routers) that this ring will allow
# itself to pass. Note that multicast routing must be
# specifically enabled on most network routers.
ttl: 1
}
}
logging {
# Log the source file and line where messages are being
# generated. When in doubt, leave off. Potentially useful for
# debugging.
fileline: off
# Log to standard error. When in doubt, set to no. Useful when
# running in the foreground (when invoking "corosync -f")
to_stderr: no
# Log to a log file. When set to "no", the "logfile" option
# must not be set.
to_logfile: yes
logfile: /var/log/cluster/corosync.log
# Log to the system log daemon. When in doubt, set to yes.
to_syslog: no
# Log debug messages (very verbose). When in doubt, leave off.
debug: on
# Log messages with time stamps. When in doubt, set to on
# (unless you are only logging to syslog, where double
# timestamps can be annoying).
timestamp: on
logger_subsys {
subsys: QUORUM
debug: off
}
}
# Log the source file and line where messages are being
# generated. When in doubt, leave off. Potentially useful for
# debugging.
fileline: off
# Log to standard error. When in doubt, set to no. Useful when
# running in the foreground (when invoking "corosync -f")
to_stderr: no
# Log to a log file. When set to "no", the "logfile" option
# must not be set.
to_logfile: yes
logfile: /var/log/cluster/corosync.log
# Log to the system log daemon. When in doubt, set to yes.
to_syslog: no
# Log debug messages (very verbose). When in doubt, leave off.
debug: on
# Log messages with time stamps. When in doubt, set to on
# (unless you are only logging to syslog, where double
# timestamps can be annoying).
timestamp: on
logger_subsys {
subsys: QUORUM
debug: off
}
}
quorum {
# Enable and configure quorum subsystem (default: off)
# see also corosync.conf.5 and votequorum.5
#provider: corosync_votequorum
}
# Enable and configure quorum subsystem (default: off)
# see also corosync.conf.5 and votequorum.5
#provider: corosync_votequorum
}
Thanks!
startup.log
Description: Binary data
_______________________________________________ Pacemaker mailing list: Pacemaker@oss.clusterlabs.org http://oss.clusterlabs.org/mailman/listinfo/pacemaker
Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org
