-------------------------------------------------------------------------------- Fedora Update Notification FEDORA-2013-23447 2013-12-16 06:31:03 --------------------------------------------------------------------------------
Name : CuraEngine Product : Fedora 20 Version : 13.11.2 Release : 1.fc20 URL : https://github.com/Ultimaker/CuraEngine Summary : Engine for processing 3D models into G-code instructions for 3D printers Description : CuraEngine is a C++ console application for 3D printing G-code generation. It has been made as a better and faster alternative to the old Skeinforge engine. This is just a console application for G-code generation. For a full graphical application look at cura with is the graphical frontend for CuraEngine. -------------------------------------------------------------------------------- Update Information: cura update 13.11.2 * Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend. * Added disallowed zones for UM2 * Added ooze-shield for dual-color printing * Added wipe tower for dual-extrusion * Added no-go zones for UM2 glass clips * Added imageToMesh tool to load images as 3D height maps * Fixed Z support distance when using "everywhere" support. * Updated to new version of clipper to fix rare slicing bugs that resulted in odd paths. * Fixed "Reset profile" so it no longer resets the machine settings. * Updated support material so support is smoother and has less small sections which are hard to remove. * Fixed start-gcode when using dual-support material * Change how the fan is handled on lower layer to improve UM2 printing. * Fix that retraction is enabled when selecting UM2 or RepRap. * Scale down very large models, or scale up very tiny models automagicly. * Fixed skirt and brim to go around the support instead of under it. * Added spiralize mode Ultimaker2 - Firmware update - 13.11-2 * Fixed UM2 build volume offset so that you do not print off the glass plate. * Slightly tweaked the filament change procedure so there is less chance of a blob staying behind. * Slightly tweaked the SD-Card error problems. * Added LED settings to Tune menu * Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot. * Make sure all commands are finished before starting a print or changing material. This could cause issues when you where too fast. * Fixed SD-Card read error * Added feature to store your own material presets * Fixed the 280C ABS problem, causing a temperature sensor error -------------------------------------------------------------------------------- ChangeLog: * Sat Dec 14 2013 Miro Hrončok <[email protected]> - 13.11.2-1 - New version 13.11.2 - Makefile seding changed to reflect changes - Clipper usage no longer need patching -------------------------------------------------------------------------------- This update can be installed with the "yum" update program. Use su -c 'yum update CuraEngine' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora Project GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys -------------------------------------------------------------------------------- _______________________________________________ package-announce mailing list [email protected] https://admin.fedoraproject.org/mailman/listinfo/package-announce
