Pulling my hair a bit on this before finding the error. The "boot_command" is missing a colon after fd0. A correct line is:
"<up><tab> text biosdevname=0 net.ifnames=0 ks=hd:fd0:/baseimage_130_74.cfg<enter><wait>" See https://www.centos.org/docs/5/html/Installation_Guide-en-US/s1-kickstart2-startinginstall.html On 16 April 2018 at 23:10, Gabo Kete <[email protected]> wrote: > Hi Aaron > > In order to rule out any possible issue with the DHCP server in VmWare or > any lease issues, I'd suggest you build another VM where you > install/configure another DHCP server or setup on an already running VM a > DHCP server.. Once this server is up you can check the logs to see if your > DHCP server just built is leasing any kind of IP address > > What does VMware server logs shows you in regards the dhcp lease time? > > On Tuesday, April 17, 2018 at 7:54:31 AM UTC+12, Aaron Kulbe wrote: >> >> I provided a copy of my kickstart file earlier in the thread. I can take >> the kickstart file and pass it to the OS install manually and everything >> works fine but when I attempt to do it with Packer nothing works. >> >> I'm not saying that it is not a configuration issue. I just need help >> determining where I am getting this wrong. >> >> Get Outlook for iOS <https://aka.ms/o0ukef> >> ------------------------------ >> *From:* [email protected] <[email protected]> on behalf >> of Rickard von Essen <[email protected]> >> *Sent:* Monday, April 16, 2018 10:27:02 AM >> *To:* [email protected] >> *Subject:* Re: [packer] Error getting SSH address >> >> You picture shows the problem. "Warning: can not boot. Starting emergency >> shell" >> >> This is most likely a problem with your ks file. Try building a known >> good one such as https://github.com/chef/bento/blob/master/centos/centos- >> 7.4-x86_64.json and compare what is different in their ks. If you don't >> find the cause but theirs is working, us it and evolve it in small steps to >> what you need. >> >> On 16 April 2018 at 18:00, Aaron Kulbe <[email protected]> wrote: >> >>> Hi Rickard, >>> >>> >>> >>> I’m not sure how this is supposed to be easy. I’m guessing I cannot >>> attach screenshots to this group list post, but if it doesn’t work, you can >>> see it at https://www.dropbox.com/s/w3o23riipmz3fpw/packer_issues.png? >>> dl=0 >>> >>> >>> >>> The VM doesn’t getting a network, so I’m not sure how I can connect to >>> it. On the left, is the packer run. On the right is tailing the debug log, >>> and on top is the VNC connection to the host. >>> >>> >>> >>> >>> >>> >>> >>> *From:* [email protected] [mailto:[email protected]] *On >>> Behalf Of *Rickard von Essen >>> *Sent:* April 14, 2018 14:43 >>> *To:* [email protected] >>> >>> *Subject:* Re: [packer] Error getting SSH address >>> >>> >>> >>> This is usually quite easy to troubleshoot, use a playbook a something >>> like this: >>> >>> >>> >>> 1) Disable headless, or use VNC >>> >>> 2) Run the build, connect to the console. Check any error messages. >>> >>> 3) After reboot login as root and check what's the status of the network >>> is it up, does it have an IP. Do the normal troubleshooting for networking. >>> >>> 4) Check if you can ssh from the host to the guest: ssh -l vagrant <IP>. >>> >>> >>> >>> Interesting things to check where did it receive it's DHCP lease from? >>> If it did get one. What's the mac for the NIC etc. >>> >>> >>> >>> On 14 April 2018 at 21:13, Aaron Kulbe <[email protected]> wrote: >>> >>> Does that apply if there is no external DHCP server? I’ll draw a text >>> diagram, and hope it’ll render okay. Are you saying that the “builder VM” >>> (as diagrammed below) is forwarding the DHCP request back upstream to the >>> cluster, in hopes of getting an address there? >>> >>> >>> >>> [*target VM*] (whose final destination will be the cluster on the >>> bottom) >>> >>> ^ >>> >>> ^ >>> >>> ^ >>> >>> [*builder VM* where packer runs] (this VM has to have an IP statically >>> configured, as all we have is vRA’s crappy IPAM, and no DHCP) >>> >>> ^ >>> >>> ^ >>> >>> ^ >>> >>> [*vSphere cluster* w/vRealize Automation (vRA)] >>> >>> >>> >>> *From: *'Nicholas Bayle' via Packer <[email protected]> >>> *Reply-To: *"[email protected]" <[email protected]> >>> *Date: *Saturday, April 14, 2018 at 11:58 AM >>> *To: *"[email protected]" <[email protected]> >>> *Subject: *Re: [packer] Error getting SSH address >>> >>> >>> >>> I had this issue. >>> >>> >>> >>> The problem occurs when the host VM has permission to "monitor all >>> traffic" on the parent host. The DHCP request ends up going outside the >>> VMware host (despite whatever your nat/hostonly settings are) to the parent >>> VMware installation or external DHCP server. You can verify this by looking >>> at what subnet the VM is supposed to be on ( >>> /etc/vmware/vmnet8/dhcpd/dhcpd.conf) and comparing it to the actual IP >>> that the VM receives (VNC to the instance packer is building). If you go to >>> your parent DHCP server and look at the leases, you will likely find your >>> DHCP lease. >>> >>> >>> >>> If you can figure out how to deny that traffic, it will get the correct >>> DHCP server and the lease will end up in the correct file for packer. >>> >>> >>> >>> It's all terribly confusing, so hopefully this makes sense. >>> >>> >>> >>> Nick >>> >>> >>> >>> On Sat, Apr 14, 2018 at 8:44 AM, Aaron Kulbe <[email protected]> >>> wrote: >>> >>> I have been using 1.2.2, but I also checked out the latest 1.2.3-dev >>> code, and still get the same issue. >>> >>> >>> >>> Here's my sanitized KS file. >>> >>> >>> >>> >>> >>> >>> >>> #platform=x86, AMD64, or Intel EM64T >>> >>> #version=DEVEL >>> >>> # Install OS instead of upgrade >>> >>> install >>> >>> # Keyboard layouts >>> >>> keyboard 'us' >>> >>> >>> >>> # Root password >>> >>> rootpw "$1$<my password hash>" --iscrypted >>> >>> >>> >>> # System Services >>> >>> services --enabled="chronyd" >>> >>> services --enabled="sshd" >>> >>> >>> >>> # Create default user >>> >>> user --name=myuser --groups=myuser,wheel >>> >>> user --name=vagrant --groups=vagrant,wheel --password=vagrant >>> >>> >>> >>> # System timezone >>> >>> timezone UTC --utc >>> >>> # System language >>> >>> lang en_US.UTF-8 >>> >>> # Firewall configuration >>> >>> firewall --disabled >>> >>> # System authorization information >>> >>> auth --enableshadow --enablemd5 >>> >>> >>> >>> # Use CDROM installation media >>> >>> cdrom >>> >>> >>> >>> # Use text mode install >>> >>> text >>> >>> >>> >>> # SELinux configuration >>> >>> selinux --permissive >>> >>> >>> >>> # Do not configure the X Window System >>> >>> skipx >>> >>> >>> >>> # Network information >>> >>> network --bootproto=dhcp --device=eth0 >>> >>> network --hostname=localhost.localdomain >>> >>> >>> >>> # Reboot after installation >>> >>> reboot >>> >>> >>> >>> # System bootloader configuration >>> >>> bootloader --location=mbr >>> >>> >>> >>> # Disk partitioning information >>> >>> zerombr >>> >>> clearpart --all --drives=sda >>> >>> part /boot --fstype ext4 --size=500 >>> >>> part pv.00 --size=16000 --ondisk=sda >>> >>> volgroup vg00 pv.00 >>> >>> logvol / --vgname=vg00 --fstype=xfs --size=12288 --name=lv_root >>> >>> #logvol /home --vgname=vg00 --fstype=xfs --size=2048 --name=lv_home >>> >>> #logvol /var/log --vgname=vg00 --fstype=xfs --size=2048 --name=lv_varlog >>> >>> >>> >>> %packages >>> >>> # Minimal RHEL install >>> >>> @core >>> >>> # Further minimize unneeded packages >>> >>> -alsa-lib >>> >>> -mariadb-libs >>> >>> -parted >>> >>> -aic94xx-firmware >>> >>> -iwl* >>> >>> -plymouth >>> >>> -firewalld >>> >>> # Add packages we actually need >>> >>> chrony >>> >>> tmux >>> >>> libyaml >>> >>> ncurses-libs >>> >>> setools-libs >>> >>> open-vm-tools >>> >>> vim-enhanced >>> >>> yum-utils >>> >>> net-tools >>> >>> wget >>> >>> bzip2 >>> >>> unzip >>> >>> mtr >>> >>> nmap-ncat >>> >>> strace >>> >>> tcpdump >>> >>> selinux-policy-devel >>> >>> libselinux-utils >>> >>> sssd >>> >>> realmd >>> >>> policycoreutils-python >>> >>> samba-common-tools >>> >>> krb5-workstation >>> >>> setools-console >>> >>> make >>> >>> openssh-clients >>> >>> openssh-server >>> >>> %end >>> >>> >>> >>> %post --log=/root/ks-post.log >>> >>> # Register with Red Hat >>> >>> /usr/sbin/subscription-manager register --org=<my org number> >>> --activationkey=<my activationkey> >>> >>> # Unpinning for now. >>> >>> /usr/sbin/subscription-manager release --set=7.2 >>> >>> >>> >>> # add extra repos >>> >>> /usr/sbin/subscription-manager repos --enable rhel-7-server-optional-rpms >>> >>> /usr/sbin/subscription-manager repos --enable >>> rhel-7-server-rh-common-rpms >>> >>> >>> >>> # add EPEL and packages on EPEL >>> >>> wget http://dl.fedoraproject.org/pub/epel/epel-release-latest-7. >>> noarch.rpm >>> >>> rpm -ivh epel-release-latest-7.noarch.rpm >>> >>> yum check-update >>> >>> yum -y install facter katello-agent mailx yum-utils >>> >>> yum -y erase mariadb-libs postfix ivtv-firmware emacs-filesystem fxload >>> >>> >>> >>> # set time >>> >>> ln -s /usr/share/zoneinfo/UTC /etc/localtime >>> >>> >>> >>> # Set up regular users & keys >>> >>> mkdir -p /home/myuser/.ssh/ >>> >>> chmod 700 /home/myuser/.ssh >>> >>> curl -k http://<my web server>/myco_CD_rsa.pub -o >>> /home/myuser/.ssh/authorized_keys >>> >>> curl -k http://<my web server>/myco_CD_DEV_rsa.pub >> >>> /home/myuser/.ssh/authorized_keys >>> >>> chown -R myuser:myuser /home/myuser/.ssh/ >>> >>> chmod 600 /home/myuser/.ssh/authorized_keys >>> >>> echo "myuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers.d/myuser >>> >>> echo "Defaults:myuser !requiretty" >> /etc/sudoers.d/myuser >>> >>> chown root:root /etc/sudoers.d/myuser >>> >>> chmod 440 /etc/sudoers.d/myuser >>> >>> >>> >>> mkdir -p /home/vagrant/.ssh/ >>> >>> chmod 700 /home/vagrant/.ssh >>> >>> curl -k http://<my web server>/myco_CD_rsa.pub -o >>> /home/vagrant/.ssh/authorized_keys >>> >>> chown -R vagrant:vagrant /home/vagrant/.ssh/ >>> >>> chmod 600 /home/vagrant/.ssh/authorized_keys >>> >>> echo "vagrant ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers.d/vagrant >>> >>> echo "Defaults:vagrant !requiretty" >> /etc/sudoers.d/vagrant >>> >>> chown root:root /etc/sudoers.d/vagrant >>> >>> chmod 440 /etc/sudoers.d/vagrant >>> >>> >>> >>> # Set up Manifest generation >>> >>> echo "export BASE_IMAGE_VERSION=1.3.0" > /etc/profile.d/baseimage.sh >>> >>> chmod +x /etc/profile.d/baseimage.sh >>> >>> >>> >>> curl -k http://<my web server>/generate_manifest.sh -o >>> /home/myuser/generate_manifest.sh >>> >>> chmod +x /home/myuser/generate_manifest.sh >>> >>> >>> >>> # update everything >>> >>> yum -y update >>> >>> >>> >>> %end >>> >>> >>> >>> >>> On Saturday, April 14, 2018 at 4:06:49 AM UTC-7, Rickard von Essen >>> wrote: >>> >>> (Change management)... There have been some fixes around this is 1.2.1 >>> and 1.2.2 be sure to test it with 1.2.2. >>> >>> >>> >>> If that doesn't solve it provide your KS file so we can comment on it. >>> >>> >>> >>> On 14 April 2018 at 04:41, Aaron Kulbe <[email protected]> wrote: >>> >>> The management won't let us run packer builds on vSphere yet. So we're >>> stuck standing up a VM with nested virt enabled on it. >>> >>> >>> >>> When I attempt to do a build, I get this in the log: >>> >>> >>> >>> 2018/04/14 01:01:03 packer: 2018/04/14 01:01:03 [DEBUG] Error getting >>> SSH address: IP lookup failed: None of the found device(s) [vmnet8] has a >>> DHCP lease for MAC 00:0c:29:81:91:5d >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 Located networkmapper >>> configuration file using Workstation: /etc/vmware/netmap.conf >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 GuestIP discovered >>> device matching nat: vmnet8 >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 Lookup up IP >>> information... >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 GuestAddress found MAC >>> address in VMX: 00:0c:29:81:91:5d >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 Trying DHCP leases path: >>> /etc/vmware/vmnet8/dhcpd/dhcpd.leases >>> >>> 2018/04/14 01:01:08 packer: 2018/04/14 01:01:08 IP lookup failed: None >>> of the found device(s) [vmnet8] has a DHCP lease for MAC 00:0c:29:81:91:5d >>> >>> >>> >>> (it repeats continuously) >>> >>> >>> >>> Here is my template: >>> >>> >>> >>> ➜ build_here cat rhel72.json >>> >>> { >>> >>> "builders": [ >>> >>> { >>> >>> "type": "vmware-iso", >>> >>> "boot_command": [ >>> >>> "<up><tab> text biosdevname=0 net.ifnames=0 >>> ks=hd:fd0/baseimage_130_72.cfg<enter><wait>" >>> >>> ], >>> >>> "boot_wait": "15s", >>> >>> "disk_size": "20480", >>> >>> "guest_os_type": "rhel7-64", >>> >>> "headless": true, >>> >>> "iso_urls": [ >>> >>> "rhel-server-7.2-x86_64-dvd.iso" >>> >>> ], >>> >>> "floppy_files": [ "http/baseimage_130_72.cfg" ], >>> >>> "iso_checksum_type": "sha256", >>> >>> "iso_checksum": "03f3a0291634335f6995534d829bd >>> 21ffaa0d000004dfeb1b2fb81052d64a4d5", >>> >>> "ssh_username": "vagrant", >>> >>> "ssh_password": "vagrant", >>> >>> "ssh_port": 22, >>> >>> "ssh_wait_timeout": "20000s", >>> >>> "shutdown_command": "echo 'vagrant'|sudo -S /sbin/halt -h -p", >>> >>> "tools_upload_flavor": "linux", >>> >>> "vm_name": "packer-rhel-72-x86_64", >>> >>> "vnc_port_min": "5902", >>> >>> "vnc_port_max": "5902", >>> >>> "vnc_disable_password": true, >>> >>> "network": "nat", >>> >>> "vmx_data": { >>> >>> "cpuid.coresPerSocket": "1", >>> >>> "memsize": "1024", >>> >>> "numvcpus": "1" >>> >>> } >>> >>> } >>> >>> ], >>> >>> "post-processors": [ >>> >>> { >>> >>> "output": "builds/{{.Provider}}-rhel72.box", >>> >>> "type": "vagrant", >>> >>> "keep_input_artifact": true >>> >>> }, >>> >>> { >>> >>> "type": "ovftool", >>> >>> "only": [ >>> >>> "vmware-iso" >>> >>> ], >>> >>> "format": "ova" >>> >>> } >>> >>> ] >>> >>> } >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/75afbb96-e1cb-4879-962f-6d2b30c32f30%40googlegroups.com >>> <https://groups.google.com/d/msgid/packer-tool/75afbb96-e1cb-4879-962f-6d2b30c32f30%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/da3012d7-8dfa-4827-8cda-176b8f215525%40googlegroups.com >>> <https://groups.google.com/d/msgid/packer-tool/da3012d7-8dfa-4827-8cda-176b8f215525%40googlegroups.com?utm_medium=email&utm_source=footer>. >>> >>> >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/CAGzi4%3D50ti3dUXLc-0zz3n8G6N_r6vDRZT- >>> sgKPOxec3oH39Ow%40mail.gmail.com >>> <https://groups.google.com/d/msgid/packer-tool/CAGzi4%3D50ti3dUXLc-0zz3n8G6N_r6vDRZT-sgKPOxec3oH39Ow%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/AFF4642F-4FAB-49DA-8DA1-71027E49DEBF%40longviewbits.com >>> <https://groups.google.com/d/msgid/packer-tool/AFF4642F-4FAB-49DA-8DA1-71027E49DEBF%40longviewbits.com?utm_medium=email&utm_source=footer> >>> . >>> >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >>> >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/CALz9Rt_QugXOLno4ZvPHDCAxrQucWhDNQWs0TPQJw2M >>> dWycY8g%40mail.gmail.com >>> <https://groups.google.com/d/msgid/packer-tool/CALz9Rt_QugXOLno4ZvPHDCAxrQucWhDNQWs0TPQJw2MdWycY8g%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> This mailing list is governed under the HashiCorp Community Guidelines - >>> https://www.hashicorp.com/community-guidelines.html. Behavior in >>> violation of those guidelines may result in your removal from this mailing >>> list. >>> >>> GitHub Issues: https://github.com/mitchellh/packer/issues >>> IRC: #packer-tool on Freenode >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "Packer" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/packer-tool/CY4PR15MB19105E7414E3E8B36D4AC825CDB00% >>> 40CY4PR15MB1910.namprd15.prod.outlook.com >>> <https://groups.google.com/d/msgid/packer-tool/CY4PR15MB19105E7414E3E8B36D4AC825CDB00%40CY4PR15MB1910.namprd15.prod.outlook.com?utm_medium=email&utm_source=footer>. >>> >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> This mailing list is governed under the HashiCorp Community Guidelines - >> https://www.hashicorp.com/community-guidelines.html. Behavior in >> violation of those guidelines may result in your removal from this mailing >> list. >> >> GitHub Issues: https://github.com/mitchellh/packer/issues >> IRC: #packer-tool on Freenode >> --- >> You received this message because you are subscribed to the Google Groups >> "Packer" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit https://groups.google.com/d/ms >> gid/packer-tool/CALz9Rt_E2dbYP44m%3DCemnQpUzjFCpNFSj5_KJiSvS >> 2j8xBtLtA%40mail.gmail.com >> <https://groups.google.com/d/msgid/packer-tool/CALz9Rt_E2dbYP44m%3DCemnQpUzjFCpNFSj5_KJiSvS2j8xBtLtA%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- > This mailing list is governed under the HashiCorp Community Guidelines - > https://www.hashicorp.com/community-guidelines.html. Behavior in > violation of those guidelines may result in your removal from this mailing > list. > > GitHub Issues: https://github.com/mitchellh/packer/issues > IRC: #packer-tool on Freenode > --- > You received this message because you are subscribed to the Google Groups > "Packer" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/packer-tool/120bfd6d-f818-4205-b5a6-f5c1433411ea%40googlegroups.com > <https://groups.google.com/d/msgid/packer-tool/120bfd6d-f818-4205-b5a6-f5c1433411ea%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- This mailing list is governed under the HashiCorp Community Guidelines - https://www.hashicorp.com/community-guidelines.html. Behavior in violation of those guidelines may result in your removal from this mailing list. GitHub Issues: https://github.com/mitchellh/packer/issues IRC: #packer-tool on Freenode --- You received this message because you are subscribed to the Google Groups "Packer" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/packer-tool/CALz9Rt_O02hiraFhF%2B740hqL1FqcZCwj%3DKejnpOe3uCZKC%2Bf6g%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
