Hi Jorge

As long routing is in place you can reach PF management interface, have a
look here

https://www.packetfence.org/doc/PacketFence_Installation_Guide.html#_routed_networks

There is good info a considerations on routed networks

Have a nice day, Enrique.



El jue, 5 ene 2023 a las 13:36, jorge martínez via PacketFence-users (<
packetfence-users@lists.sourceforge.net>) escribió:

> Hi Community,
>
> First of all, sorry for my english, it is not my first language.
>
> I'm planning to deploy a packetfence for the NAC system of the network
> that i'm developing for a factory.
>
> I have 2 building blocks planned, each building block has his own
> management VLAN for the Cisco Switches, additionally my PF server will be
> in my DMZ zone with a different management vlan.
>
> I want to know if I reach the radius service of PF from the switch in a
> different VLAN which is not present in the DMZ zone,
>
> as i have can read in the documentation, the Switch and the PF should be
> in the same VLAN for registration process:
>
> Extracted from documentation:
>
>   5.1. Going Through the Configurator
> .
> .
> .
>   • Step 1 - Configure Network - make sure you define only one interface
> with the "Management" type. That network interface will be the one to which
> the Cisco 2960 access switch will talk to. *The management interface of
> PacketFence and the Cisco 2960 should normally be in the same network.  *
>
> I want to isolate each management VLAN and only the legitime
> communications between management vlans will be allowed.
>
> Currently I have a test environment eve-ng based, and I have no
> communication with the IP of the PF (192.168.8.233 - eth0 management)  from
> the CIsco switch (VLAN 20 (MGM) - 10.100.192.1).
>
> Others online services in the same network (192.168.8.0/22) are reach
> from the Cisco switch without problem.
>
> So to resumen, I want to know if I can have multiple and differentes VLANs
> for each building blocks that can connect and work with PF.
>
> Is there any way to integrate PF with this topology?
>
> Thank you in advance.
>
> BR.
>
> _______________________________________________
> PacketFence-users mailing list
> PacketFence-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>


-- 

[image: Imágenes integradas 1]
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to