Hello Packetfence Users,
We tested a fresh install of v12.1 on a freshly spun up Debian 11.6 today.
packetfence_12.1.0+20230116163629+748667390+0011+maintenance~12~1+bullseye1_all.deb
Prior to installing packetfence, we deployed some basic packages, listed
here as part of our default staging script. I do not see any reason any of
these would cause detection scripts for the interfaces to fail, and both
ifconfig and ip are providing valid output on the CLI.
apt install gnupg arptables dnsutils unzip pigz mtr-tiny less vim screen
curl iperf3 wget tcpdump dialog subnetcalc vlan bridge-utils ethtool iftop
iotop deborphan apt-show-versions ethtool pv systemd-timesyncd
The configurator however did not detect any interfaces. The simple
interface configuration is shown below, for the Management, Registration
and Isolation (eth0, eth1, eth2 respectively).
ip addr output is below. The configurator web page is stuck at step 1,
with no interfaces shown to select for the Management network. Our next
step will be to add our interfaces into the configuration manually via CLI
and see if the configurator picks them up, or possibly revert to v11.1 and
see if it happens there too.
Any insights here on why this might be happening appreciated.
pf5:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:16:3e:dc:7d:fd brd ff:ff:ff:ff:ff:ff
inet 10.2.1.2/24 brd 10.2.1.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fedc:7dfd/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:16:3e:dc:7d:fe brd ff:ff:ff:ff:ff:ff
inet 10.2.2.2/24 brd 10.2.2.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fedc:7dfe/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:16:3e:dc:7d:ff brd ff:ff:ff:ff:ff:ff
inet 10.2.3.2/24 brd 10.2.3.255 scope global eth2
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fedc:7dff/64 scope link
valid_lft forever preferred_lft forever
153: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
state DOWN group default
link/ether 02:42:e7:4c:45:ca brd ff:ff:ff:ff:ff:ff
inet 100.64.0.1/24 brd 100.64.0.255 scope global docker0
valid_lft forever preferred_lft forever
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
