Still stuck on the same problem Any suggestion would be really appreciated Le lun. 3 avr. 2023 à 23:20, TISSIR, Yassine <56...@etu.he2b.be> a écrit :
> Hello everyone , > I'm currently testing packetfence for my company. I started with version > 11.2 but I decided to upgrade to 12.2 because of an issue that I think > prevented getting the captive portal to work in vlan enforcement mode (A > guest computer placed in the registration VLAN was redirected to > "packetfence.domain/captive-portal" that points to 66.70.255.147 but the > page was loading indefinitely). The problem is that after the update I have > the following error when trying to save ACLs for registration VLAN: > > "AccessListMapping.0.accesslist: WARNING: Syntax error in > ACL:packetfence, near: >in<. > "config/switch/192.168.1.10" > > I also had an AD authentication source for the domain computers that > worked fine before the update, but stopped working now (Audit tab shows > successfuls authentications, but the computers don't get internet access > anymore). > > Here is my switches.conf : > > [default] > description=aruba sw > VlanMap=N > ExternalPortalEnforcement=Y > deauthOnPrevious=N > [192.168.1.10] > group=default > description=ARUBA 2930 > wsPwd=xxxxxx > wsUser=xxxxxx > SNMPPrivProtocolWrite=md5 > SNMPPrivProtocolRead=md5 > SNMPAuthProtocolRead=md5 > SNMPAuthProtocolWrite=md5 > SNMPUserNameWrite=xxxxxx > SNMPVersion=3 > SNMPUserNameRead=xxxxxx > SNMPAuthPasswordWrite=xxxxxx > SNMPAuthPasswordRead=xxxxxx > SNMPPrivPasswordRead=xxxxxx > SNMPPrivPasswordWrite=xxxxxx > SNMPEngineID=xxxxxx > SNMPPrivProtocolTrap=AES > SNMPUserNameTrap=xxxxxx > SNMPAuthProtocolTrap=md5 > SNMPVersionTrap=3 > SNMPAuthPasswordTrap=xxxxxx > SNMPPrivPasswordTrap=xxxxxx > guestVlan=10 > defaultVlan=10 > registrationVlan=20 > type=Aruba::2930M > radiusSecret=xxxxxx > VlanMap=Y > coaPort=3799 > isolationVlan=99 > UserVlan=10 > macDetectionVlan=20 > ExternalPortalEnforcement=N > registrationUrl=http://192.168.1.4/Aruba::2930M > UrlMap=Y > AccessListMap=Y > > > The ACLS that I try to save are the one from the Network Devices > Configuration Guide for Aruba 2930 switch: > > permit in tcp from any to 192.168.1.4 80 > permit in tcp from any to 192.168.1.4 443 > deny in tcp from any to any 80 cpy > deny in tcp from any to any 443 cpy > permit in udp from any to any 53 > permit in udp from any to any 67 > > Any help would be really appreciated > > >
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
