Thanks, I'll give it a try and see how it works out. We have 3 8200zl switches in a full mesh at our core.
I used to be a Cisco guy but have been won over to HP. Can't get much better than a lifetime guarantee for no extra cost! -CH On 09/27/2010 11:32 AM, Olivier Bilodeau wrote: > Hi Chad, > > Chad Hurley wrote: > >> Has anyone configured PacketFence to work with an HP 8200zl switch? If >> so, did you have to customize MIBs for this? >> > (googling..) > Wow that's a big switch.. :) It's used as an access switch!? ;) > > PacketFence doesn't require MIBs for use of a switch since we use OIDs > in their numeric format in the code. > > So what you need is an HP 8200zl PacketFence module and no, there aren't > any I've heard off. > > In that case, you should first try to use the other HP modules with > PacketFence. Often it works out of the box but in this case, it seems > like a very different switch so I'm not sure.. > > If the above fails, then you need to look at developing our own module > or sponsor us to do the work. > > Have a good one! > -- CONFIDENTIAL COMMUNICATION This e-mail message is intended only for the use of the addressee and may contain information that is privileged and confidential. Any unauthorized dissemination, distribution, or copying is strictly prohibited. If you receive this transmission in error, please contact [email protected]. Please don’t print this e-mail unless you really need to. ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Packetfence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
