Hi Kurtis, > Hi all. Can anyone give me any insight as to what I may have missed? > Does this use CLI in addition to SNMP to configure a port in this scenario?
If you have VoIP I think CLI is required because there is no way to set a maximum MACs on the data VLAN using SNMP. Otherwise if you don't have VoIP, maybe we have a problem with the 3560's and floating network devices. > > I have defined a floating network device by MAC and have configured it > to create a trunk port, but what is happening is no trunk port is > created and the dummy mac and the line “switchport port-security > violation restrict” are being removed from the port config when this > device is plugged in. When the device is removed and another device > plugged in the original port configuration does not return leaving a > port that does not configured properly to accept a different device. > Sounds like there's an issue trying to setup a trunk port on your switch. My gut feeling is that the SNMP interface to do so varies between the 2950 (which was our original floating device target) and the 3560. First, can you send the output of logs/packetfence.log? Extract only the portion where you do a floating device test. We should see failures related to setting trunk and I'll be able to troubleshoot further. If you don't see anything useful, crank up the verbosity of the log in conf/log.conf by replacing: log4perl.category.pf.SNMP = WARN with log4perl.category.pf.SNMP = DEBUG Thanks, -- Olivier Bilodeau [email protected] :: +1.514.447.4918 *115 :: www.inverse.ca Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence (www.packetfence.org) ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Packetfence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
