i try to configure packetfence zen 2.0.1 on vmware worksation 7 under fedora 12
, i configured eth0,eth0.2,eth0.3,eth0.5,eth0.10 like the guide d'installation.
i have a switch catalyst 2950 with this configuration :
vlan 1 : 10.0.10.2
interface fastethernet 0/1 trunk
vlan 1 nativa
snmp-server enable traps port-security
snmp-server enable traps port-security trap-rate 1
snmp-server host 192.168.1.5 version 2c public port-security
interface FastEthernet0/4
switchport mode access
switchport port-security
switchport port-security violation restrict
switchport port-security mac-address 0200.0000.0004
no cdp enable
spanning-tree portfast
switches.conf
[default]
SNMPCommunityRead = public
SNMPCommunityWrite = private
SNMPommunityTrap = public
SNMPVersion = 2c
vlans = 1,2,3,4,10
normalVlan = 1
registrationVlan = 2
isolationVlan = 3
macDetectionVlan = 4
VoIPEnabled = no
[10.0.10.2]
type = Cisco::Catalyst_2950
mode = production
uplink = 1
the file /usr/local/pf/log/snmptrad.log is empty
if i put a cable in fastethernet0/4 the switch print violation occured
,security mac-adress and no change in the vlan of the port .
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Packetfence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
