hello, installed and configured the packetfence following the administration guide and Network Devices Configuration Guide, the test was done with a Switch H3C S5500 in 802.1x (3com in China) in the Network Devices Configuration Guide found that my switch has the same command line 3com E4800G.
Configure the switch seamlessly with 3Com E4800G commands, I had no success after 802.1x authentication to log in. PacketFence 2.2 -----------------------/////------------------------ Switchs.conf 3com E4800G 802.1x -----------------------/////------------------------ Packetfence.log pfsetvlan(21) INFO: ignoring unknown trap: 2011-06-03|22:13:51|UDP: [192.168.1.100]:1025|192.168.1.100|BEGIN TYPE 6 END TYPE BEGIN SUBTYPE .2 END SUBTYPE BEGIN VARIABLEBINDINGS .1.3.6.1.2.1.2.2.1.1.77 = INTEGER: 77|.1.3.6.1.4.1.25506.2.26.1.2.2.1.1.77.0.20.56.103.16.117.4 = Hex-STRING: 00 14 38 67 10 75 |.1.3.6.1.2.1.2.2.1.7.77 = INTEGER: up(1) END VARIABLEBINDINGS (main::parseTrap) I am suspicious that my switch is not compatible with how I Packetfence be compatible? ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Packetfence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
