Thanks to Fabrice and Arthur for their reply and it already solved my email
activation problem.
Packetfence ZEN ESX 3.6.1 - VLAN
VLAN Setup
(Vlan1=Management) = 10.0.10.1 /24
(Vlan2=Registration) = 192.168.2.10 /24, Dhcp Start = 192.168.2.11,
DNS=192.168.2.10, Gateway=192.168.2.10
(Vlan3=Isolation) = 192.168.3.10 /24, Dhcp Start = 192.168.3.11,
DNS=192.168.3.10, Gateway=192.168.3.10
(Vlan4=MAC Trap/Blank)
(Vlan5=Guest) = 192.168.5.10 /24, Dhcp Start = 192.168.5.11, DNS=192.168.5.10,
Gateway=192.168.5.10
(Vlan10=Normal Vlan) = 192.168.1.10 /24, Dhcp Start = 192.168.1.11,
DNS=4.2.2.2, Gateway=192.168.1.1
Now another problem occur:
1. Why is it the guest pc is asking an IP Address on the Normal VLAN dhcp
server while on the 10 minute grace period for email activation? is it how
packetfence works?
2. When I confirm the email and activate the guest access, it does not
re-assign to guest vlan but stays on the normal vlan.
3. I configured the guest access to 30mins but it doesn't block the internet
access after the 30 mins period. Packetfence cut the access to 40mins before
going again to the registration vlan.
Sorry for the dumb questions. It is really a great software but I cannot seem
to get it working although I read the administration guide a lot of times.
Best Regards,
Mon
------------------------------------------------------------------------------
Try New Relic Now & We'll Send You this Cool Shirt
New Relic is the only SaaS-based application performance monitoring service
that delivers powerful full stack analytics. Optimize and monitor your
browser, app, & servers with just a few lines of code. Try New Relic
and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
