Hi to all,
I’m not yet done testing Packetfence ZEN 3.6.1 but here
comes 4.0.0….
Here’s what I’ve done:
1. Install Packetfence ZEN 4.0.0 ovf file on VMWare
esxi 5.1 and power on VM.
2. Login using root as user and p@ck3tf3nc3 as
password.
3. Manually configure IP address of eth1 (10.0.10.1
/24) and restart network (service network restart).
4. Open browser and access web gui. (https://10.0.10.1:1443/configurator).
5. Run wizard. Step 1 – VLAN mode.
6. Step 2 – Assign eth1 as management.
a. Create VLAN for Registration (eth1.2 –
192.168.2.10/24)
b. Create VLAN for Isolation (eth1.3 –
192.168.3.10/24)
c. Create VLAN for Guest (eth1.5 – 192.168.5.10/24)
7. Then the problem occurs.
a. Eth1.2, eth1.3, eth1.5 are enable when created.
b. Eth1 (physical) assigned as management cannot be
enabled and it stay at “off” position.
8. I continue the setup wizard until all steps is
finished.
9. Then I access the Packetfence Web Gui (https://10.0.10.1:1443/admin)
and
configure the switches, guest access and other settings.
10. Finally, I restart the Packetfence VM (shutdown
–r now) and when it boots up, I cannot access the web gui anymore (because eth1
is not enabled on setup wizard even though it is enabled when the packetfence
boots up).
Eht1 ===>
Management = Off Position (disabled) cannot be enabled.
Eth1.2 == =
> Registration = On Position (enabled)
Eht1.3 ===
> Isolation = On Position (enabled)
Eth1.5 ===
> Guest = On Position (enabled)
Is there someone encounter same problem as mine using the
new Packetfence ZEN 4.0.0?
Hope someone could help me on this.
Best regards,
Mon
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
