I do have that set. My issue is that my pf server is on VLAN 1. The switch is
set to untagged VLAN 1. How does the registration VLAN (VLAN 2) get to the pf
server? I can't have 2 untagged ports on my switch.
From: Fabrice Durand [mailto:[email protected]]
Sent: Saturday, June 29, 2013 11:17 AM
To: [email protected]
Subject: Re: [PacketFence-users] VLAN question
You must set a registration interface as vlan 2 on packetfence server.
Regards
Fabrice
Le 2013-06-27 19:28, Steve Bradley a écrit :
I have my PF server but am unsure on the switch setup for the port to the PF.
The PF is in port A1 of my HP 5400 and is untagged on VLAN 1. Port 8 of a HP
2615 switch has a laptop that I am using for testing. The port on the 2615
Port 8 VLAN changes to the Registration VLAN (VLAN 2) when I plug it in so I
believe that is ok. So, how does the PF Server answer a DHCP request if the
laptop is now on VLAN2 and my PF Server is on VLAN 1. Am I missing something
easy?
Thanks,
Steve
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
